When the “Fuel Remaining” reaches this amount, the “Low Fuel” alarm will sound and a warning LED will flash in the display.
The display will automatically go into “set” mode to allow the operator to reset the alarm value to a lower value to turn off the alarm if desired. If the option is set to zero, the “Low Fuel” alarm will be disabled.
Pressing the “Mode” button for more than one second while in the REM display will access the option available for this function.
a)Set the amount of fuel remaining when the alarm will go off. The display shows
Holding the “Up” button will increase the amount
and holding the “Down” button will decrease the amount.
Voltmeter
Displays the System Voltage. There are no adjustments available.
Tachometer Display Sequence
Quick |
|
|
Press |
|
|
M | Hourmeter | |
Quick |
|
|
Press |
|
|
M | Inst. Fuel | |
| Consumption | |
| M | US GAL |
| M | IMP GAL |
| M | Liters |
Quick |
|
|
Press |
|
|
M | Trip Fuel Consumed | |
| M | CLR TRP |
| M | ADJ TRP |
Quick |
|
|
Press |
|
|
M | Fuel Remaining | |
| M | ALARM |
Quick |
|
|
Press |
|
|
M | Voltmeter | |
Figure 1
Page 7