MOON Stargate Processor
Basic Function Remote Control Operation
The MOON Stargate uses a second remote control, the ‘WRM’ basic function (figure 10). The main purpose of the ‘WRM’ is for everyday remote operation once the Stargate has been properly calibrated. This remote uses two AAA batteries (included). To install them, use the supplied Allen key to remove the three screws located on the back plate; insert the batteries in the correct direction and then screw the back plate back into place.
The STANDBY button will switch the Stargate from either ‘Stand by’ to ‘On’ mode or vice versa.
The INPUT + and INPUT – buttons perform the same function as the buttons located on the Stargate’s front panel (refer to page 12), allowing you to sequentially cascade through each of the possible 11 source inputs in the following order: DVD, TUNER, 7.1, CD, TAPE, AUX, SAT, TV, LD, VCR1 and VCR2.
The VOL + and VOL – buttons also perform the same function as the buttons located on the front panel: increasing or decreasing the output volume
The SURR button places the processor into “Surround” mode exactly the same way as the same button located on the unit’s front panel.
The STEREO button places the processor/preamplifier into “Stereo mode”
Figure 10: WRM Remote Control
____________________________________________________________________________________
Basic Function Remote Control Operation | 19 |