Rear Panel Connections, Moon P5.3 Rear panel

MOON P 5.3 Stereo Preamplifier

Rear Panel Connections

Figure 3: MOON P5.3 Rear panel

The rear panel will look similar to Figure 3 (above). There are four (4) pairs of single-ended inputs on RCA connectors labeled A2, A3, A4 and A5. The left channel inputs are located on top and the corresponding right channel inputs are located directly below. To the left of these single-ended inputs is one (1) pair of balanced inputs labeled A1.

The MOON P5.3 Stereo Preamplifier has three pairs of outputs; One single-ended pair of RCA connectors and one balanced pair, each labeled ‘Right Output” and “Left Output”’, located on either side of the previously aforementioned inputs; They are designated for output to a power amplifier with either balanced XLR or single-ended RCA inputs. A third pair of outputs, labeled “Tape Output” on single-ended RCA connectors, located directly besides the A5 input is intended as an input to a recording device such as a cassette tape deck or CD-Recordable Player. Keep in mind that the output level on the ‘Tape Output’ is fixed and cannot be adjusted by the P5.3’s volume control. All RCA input and output connectors on the rear panel have been color coded: ‘white’ for the left channel and ‘red’ for the right channel.

In the event that your MOON P5.3 is equipped with the previously described phono section module, the input labelled A2 must be used to connect your turntable interconnect leads to this preamplifier.

Don’t hesitate to use high quality interconnects with your MOON P5.3. Poor quality cables can degrade the overall sonic performance of your system.

Your MOON P5.3 is equipped with a 1/8” mini-jack input for use with aftermarket infrared remote control receivers. The “IR in” connector is centrally located directly below the single-ended inputs. To the right of this jack is another 1/8” mini-jack which is a 12 Volt trigger output intended for use with a power amplifier equipped with a 12 Volt trigger input. The purpose of this trigger is to remotely power up and down your power amplifier at the same time as your P5.3 using its “Standby” switch.

Finally on the right side is the main power switch (“0”=off, “1”=on), the IEC receptacle, labeled “AC POWER” for the included AC power cord. Alternatively, you may use a dedicated high-performance AC power cord designed for power amplifiers.

All rear panel connectors have been chosen because they provide the best possible connections for your unit. A poor contact will degrade the signal substantially, and plugs and sockets should all look clean and free of dirt and corrosion. The easiest way to clean them is to remove the cables from their sockets and push them back in again. This procedure requires that your Stereo Preamplifier and the rest of your components be completely turned off. Not heeding this warning may result in serious damage to your equipment. Special contact cleaning fluids and enhancers should not be used, as they deposit a difficult to remove residue which degrades the performance of your components.

____________________________________________________________________________________

Rear Panel Connections

P 5.3 specifications

The Simaudio P 5.3 is a highly regarded preamplifier that showcases the company’s commitment to delivering high-fidelity audio experiences. With a sleek design and advanced engineering, this component has gained a loyal following among audiophiles and music enthusiasts alike. Simaudio, renowned for its innovative approach, has equipped the P 5.3 with a range of features that emphasize sound quality and versatility.

At the heart of the P 5.3 lies its state-of-the-art analog circuitry. The preamplifier utilizes a fully balanced design that effectively minimizes noise and distortion, ensuring that the audio signal remains pure and unaltered. This design choice contributes to an expansive soundstage, allowing listeners to experience music as intended by the artist. The P 5.3 also employs Simaudio’s proprietary Moonlink technology, enabling seamless integration with other components in the Moon product line, thus creating a cohesive and high-performance audio system.

One of the standout features of the P 5.3 is its array of inputs and outputs. With multiple line-level inputs, the preamplifier offers flexibility for connecting various sources, including CD players, turntables, and digital audio players. The inclusion of a home theater bypass allows the P 5.3 to function within a multi-channel environment, making it an excellent choice for both stereo and home theater setups.

Additionally, the P 5.3 incorporates high-quality components, including premium capacitors and resistors, which further enhance its performance. The power supply is also meticulously designed to provide clean and stable energy to the circuit, thereby preventing unwanted interference that can detract from the listening experience.

The ergonomic remote control included with the P 5.3 ensures ease of use, allowing users to navigate through settings and adjust volume levels from a distance. Another significant feature is the customizable gain settings, which allow users to tailor the output level based on their specific equipment and listening preferences.

In summary, the Simaudio P 5.3 preamplifier stands out for its sophisticated design, exceptional sound quality, and user-friendly features. Its ability to blend seamlessly with other high-fidelity components, coupled with its sturdy build quality, positions it as a top choice for those seeking to enhance their audio systems. Whether for casual listening or critical evaluation, the P 5.3 delivers a remarkable listening experience that embodies the essence of high-end audio.