MOON
Specifications
Configuration | Dual Mono | |||
Power Supply Transformers | 2 x 0.5kVA | |||
Power Supply Capacitance | ...................................... | 240,000µF | ||
Class Of Operation | A/AB |
| ||
Design | Fully Balanced Differential | |||
Input Impedance | 47,500Ω | |||
Input Sensitivity | 1780mV | |||
Output Device Type | Bipolars - 24 | |||
Output Power at 8Ω | 500 Watts | |||
Output Power at 4Ω | 1000 Watts | |||
Frequency Response | 10Hz - 200kHz | |||
Output Impedance | 0.005Ω |
| ||
Damping Factor (static) | 1600 |
| ||
Gain | ...................................................................... | 31dB |
| |
> 106dB @ full power | ||||
Maximum Output Voltage | ....................................... | 60 Volts | ||
Slew Rate | 70V/µs |
| ||
Maximum Current – Peak | 68 amperes | |||
Maximum Current – Continuous | 32 amperes | |||
Crosstalk @ 1kHz | Not applicable | |||
Intermodulation Distortion | ...................................... | Unmeasureable | ||
THD | (20Hz - 20kHz @ 1 watt) | < 0.015 % | ||
THD | (20Hz - 20kHz @ 500 watts) | < 0.04 % | ||
Power Consumption @ idle | ..................................... | 40 Watts | ||
AC Power Requirements | 120V / 60Hz or 240V / 50Hz | |||
Shipping Weight | 85 lbs | / 38 Kgs | ||
Dimensions (W x H x D, inches) | 18.75 x 7.5 x 16.5 | |||
Balanced Pin Assignment: Pin 1 | Ground |
| ||
|
| Pin 2 | Positive | |
|
| Pin 3 | Negative | |
12 Volt Trigger: | Logic | Direct | (0V off, 12V on) | |
|
| Jack | 3.5mm microphone jack | |
|
| Input Impedance | 1kΩ |
|
|
| Current Consumption | 12mA |
|
NOTE: In the event that you require the
Fuse Replacement: | For the 120V version use a 8A fast blow | (3AG size). |
| For the 230V version use a 4A fast blow | (3AG size). |
____________________________________________________________________________________
Specifications | 10 |