Connecting the W-6

MOON W-6 Mono Power Amplifier

1.Connect the input cable running from your preamplifier’s output, whether balanced or single-ended, to the amplifier’ s XLR or RCA input respectively. We highly recommend that you use the balanced XLR input (provided that your preamplifier has balanced outputs) to take full advantage of MOON W-6Mono power amplifier’s capabilities. Please refer to the next section “Balanced Operation” on page 9 for further information.

In the event that you are using a single-ended RCA interconnect, you should use the amplifier’s RCA female jack labeled “+” and leave the “dummy” RCA termination plug in the “-“ RCA female jack. If your preamplifier inverts phase, then your should use the RCA female jack labeled “-“ and insert the dummy RCA termination plug into the “+” RCA female jack.

Don’t hesitate to use high quality interconnect cables. Poor quality interconnect cables can degrade the overall sonic performance of your system. It is recommended, though not mandatory, to use balanced interconnects between your preamplifier and the W-6when using long cable runs (i.e. more than 3 meters in length).

2.Connect your speaker, with the cable of your choice, to the W-6’s speaker binding posts. Take care to respect the polarity (“+” , “-” ) of the output. Once again, don’t hesitate to use high quality speaker cables. Poor quality speaker cables can degrade the overall sonic performance of your system.

3.Connect the supplied AC power cable to the IEC receptacle, located on the amplifier’s rear panel. Alternatively, if you wish, you may use a dedicated high-performance AC cable designed for high current applications. Ensure that the AC wall outlet you use has a functioning ground. For the best sonic performance, it is preferable that you plug your W-6directly into a dedicated AC outlet and avoid using an extension cord. If you have the time and willingness, consider installing a superior quality AC wall outlet such as a hospital grade Hubbell.

4.In order to obtain the maximum performance from your audio system, we strongly recommend that the detachable power cord not come into physical contact with either the interconnect cable or the speaker cable running to and from your W-6. In the event that this can’t be avoided, you should ensure that any cables coming into contact with each other are crossed at ninety degree angles to minimize the contact area.

____________________________________________________________________________________

Connecting The W-6

W-6 specifications

The Simaudio W-6 is a high-performance power amplifier that stands out in the audiophile community for its exceptional sound quality and innovative design. As part of Simaudio's Moon series, the W-6 is engineered to deliver audio fidelity that can bring recordings to life, providing an immersive listening experience for music enthusiasts.

One of the key features of the W-6 is its high output power. The amplifier is capable of delivering 200 watts per channel into an 8-ohm load, and this output doubles to 400 watts into a 4-ohm load. This robust power delivery ensures that the W-6 can easily drive a wide range of speakers, from high-sensitivity designs to more challenging ones that require greater power to perform optimally.

The W-6 employs Simaudio's proprietary amplification technology, which includes fully balanced circuitry to eliminate common-mode noise and enhance the overall clarity of the sound. The design is based on a Class A/B operation, which combines the efficiency of Class B with the sonic benefit of Class A. This results in a warmer, more detailed sound without sacrificing dynamic range or power delivery.

Another significant characteristic of the W-6 is its high-quality components. The amplifier uses top-grade capacitors and resistors, which contribute to its reliable performance and durability. The W-6's construction is rugged, featuring a solid chassis designed to minimize vibration and maintain signal integrity. This focus on build quality ensures that users can enjoy pristine audio reproduction without interference from external factors.

In terms of connectivity, the W-6 is versatile, offering both XLR and RCA inputs, allowing it to integrate seamlessly into various audio systems. The power amplifier can also be easily paired with other components from the Moon series, creating a cohesive and high-performance audio setup.

Overall, the Simaudio W-6 is a remarkable power amplifier that combines advanced technologies, exceptional build quality, and outstanding audio performance. Whether used in a dedicated listening room or as part of a high-fidelity home theater system, the W-6 is designed to provide an unparalleled audio experience that satisfies even the most discerning audiophiles. Its combination of power, clarity, and musicality makes it a compelling choice for anyone serious about high-quality sound reproduction.