Eizo CG232W manual Functions, Main menu Sub menu, Reference

1. Introduction

Functions

The following table shows all the Adjustment menu’s adjustment and setting menus.

Main menu	Sub menu		SDI	DVI	D-SUB	Reference
Setup	Black Insertion		√	√	√	"2-6. Setting Black Insertion" (page
						22)
	Pseudo Interlace		√	-	-	"2-2. Setting SDI Input Signal" (page
	Range Extension		√	-	-	12)
	SDI Settings		√	-	-
	Reset		√	√	√
Screen	Auto Adjustment		-	-	√	"2-3. Displaying Screen Correctly
	Clock		-	-	√	(Analog Input Only)" (page 14)
	Phase		-	-	√
	Position		-	-	√
	Resolution		-	-	√
	Range Adjustment		-	-	√
	Screen Size		√	√	√	"2-5. Changing Screen Size Ratio"
	Smoothing		√	√	√	(page 20)
	Signal Filter		-	-	√	Switch mode if noise appears on the
						screen.
	Sharpness		√	-	-	"2-2. Setting SDI Input Signal" (page
	Display Area		√	-	-	12)
	12bit Mode		√	-	-
Color (Custom)*1	Black Level		√	√	√	"2-4. Adjusting Color" (page 17)
	Brightness		√	√	√
	Temperature		√	√	√
	Gamma		√	√	√
	Saturation		√	√	√
	Hue		√	√	√
	Gain		√	√	√
	Reset		√	√	√
PowerManager	On		√	√	√	"3-1. Setting Power Saving" (page 23)
	Off		√	√	√
Others	Border Intensity		√	√	√	"Set the brightness of the black area
						surrounding the displayed image."
						(page 21)
	Power Indicator		√	√	√	"3-3. Setting Power Indicator" (page
						24)
	Button Guide		√	√	√	"3-4. Setting Button Guide" (page 24)
	Menu Settings	Menu Size	√	√	√	Change the size of the menu.
		Menu Position	√	√	√	Adjust the menu position.
		Menu Off Timer	√	√	√	Set the menu displaying time.
	Reset		√	√	√	Return to the factory Default
						settings.*2
Information	Information		√	√	√	Review the Adjustment menu’s
						settings, model name, serial number
						and usage time.*3
Language	English, German, French,		√	√	√	Select the Adjustment menu’s
	Spanish, Italian, Swedish,					language.
	Chinese(Simplified),
	Chinese(Traditional) and
	Japanese

*1 The adjustable functions on the <Color> menu depend on the selected Color mode (page 18). The above table shows the sub menus when the “Custom” mode is selected (See "2-4. Adjusting Color" (page 17)).

*2 The <Setup> settings are not reset.

*3 The usage time is not always “0” when you purchase the monitor due to factory inspection.

10