Fortinet FortiDB-400B quick start Package Contents, Connecting, Configuration Tools

LED	State	Description	QuickStart Guide
Power	Green	The device is connected to a power source and on.
Hard Disk	Flashing	Activity on the hard disk.					FortiDB-400B
	Geen
Alarm	Red	Hard disk failure.
	Green	The correct cable is connected to the interface and
Ports 1 to 4 Right LED		the connected equipment has power.
	Flashing	Network activity at this interface.
	Green	The interface is connected at 1000 Mbps.
Ports 1 to4 Left LED	Amber	The interface is connected at 100 Mbps.
	Off	The interface is connected at 10 Mbps.	400B		CONSOLE	1 2 3 4
				USB

Visit these links for more information and documentation for your Fortinet product.

•Technical Documentation - http://docs.forticare.com

•Fortinet Knowledge Center - http://kc.forticare.com

•Fortinet Technical Support - http://support.fortinet.com

© Copyright 2009 Fortinet Incorporated. All rights reserved.

Products mentioned in this document are trademarks or registered trademarks of their respective holders.

Regulatory Compliance

FCC Class A Part 15 CSA/CUS15-32000-86800-20090107

7 January 2009

Package Contents

Connector	Type			Speed			Protocol		Description
Ports 1 to 4	RJ-45		10/100/1000				Ethernet		Copper gigabit connection to 10/100/1000 copper networks.
				Base-T
CONSOLE	RJ-45			9600 8/N/1			RS-232 serial		Optional connection to the management computer. Provides access to
									the command line interface (CLI).
USB	USB						USB		For future use.
400B		USB
				CONSOLE 1	2	3		4

USB

RJ-45 serial connection

Ethernet ports Removable hard disk

Rack-Mount	Straight-through	RJ-45 to	Power Cable
Brackets	Ethernet cable	DB-9 Serial Cable

Connecting

AC power connection

QuickStart Guide

Tools and Documenation

Copyright 2009 Fortinet

Trademarks

Welcome Bienvenue Willkommen 歓迎 Bienvenido Benvenuto

Connect the following to the FortiDB unit. Ensure the FortiDB unit is placed on a stable surface or install in a standard 19 inch rack.

•Insert one end of an Ethernet cable into port 1.

400B	USB
	CONSOLE	1	2	3	4

• Connect the other end of the Ethernet cable to the network hub or switch.	RJ-45 to DB-9 serial cable
• Connect the AC Power cable to the Power Supply on the back of the	connects to management
		computer
FortiDB unit.
• Connect the other end of the Power cable to a surge protected
power bar or power supply.

Ethernet cables connect to computers on the internal network

Power cable connects to power supply

Configuration Tools

Web-based manager

The FortiDB web-based manager is an easy-to-use management tool.

Use it to configure the administrator password, the interface and default gateway addresses, and configure reports.

Requirements:

•An Ethernet connection between the FortiDB unit and management computer.

•A web browser such as FireFox or Internet Explorer on the management computer.

Command Line Interface (CLI)

The CLI is a full-featured management tool. Use it to configure the administrator password, the interface addresses, the default gateway address, and the DNS server addresses. To configure advanced settings, see the Tools and Documentation CD included with the FortiDB unit.

Requirements:

•The RJ-45 to DB9 serial connection between the FortiDB unit and management computer.

•A terminal-emulation application such as HyperTerminal for Windows, on the management computer.