EverFocus EN-7522C instruction manual Never Remove the Back Cover

Page 6

￿ NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

￿ DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent shock or fire hazard, do not expose the unit to rain or moisture.

This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases.

￿ KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising. Do not cover the unit or place anything on the top of unit.

￿ AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

￿ TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor.

￿ BE CAREFUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.

Damage to a power cord can cause fire or electrical shock.

4 ……………………………………………………………………. INSTRUCTION MANUAL

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

Image 6
Contents EN-7522C Wide Screen TFT-LCD Monitor SUB Connector PIN Assignments …………………………………………… Important Safety Instruction Page Page Never Remove the Back Cover DOC Compliance Notice Bottom Panel Control Remote CONTROLLEROption 14. P.INPUTVOL Power ON/OFFAuto IR SensorOSD Menu Description Custom Menu Only Video InputCustom Menu For RGB-PC & Hdmi Input Picture Mode Picture / Sound Menu Only Video InputPage Color Tone Color Tone User Page Mute Volume Size NR Noise Reduction Page 3D Comb Picture / Sound Menu For RGB-PC & Hdmi Input PC Only RGB-PC Input PIP Menu PIP Input Source PIP Mode PIP Size Page Position Swap Sound Select Setup Menu Reset Language OSD Tone Blue Screen Key Lock Trigger Enable TriggerTrigger Input Buzzer Trigger Time Trigger Option Display Type PIP & FullAuto switching Auto switching On/OffAuto switching Input enabled Auto switching Time Wall-mount Installation Option PIN Assignments Power OFF LED Indicator 55WResolution H x LCD-TypeD x H Weee Symbols L39ME0197 Rev.0