Model Ei159
Technical Specification
Supply Voltage: | 240V AC | Fixing: | Screw fixings supplied |
Battery back up: | No battery back up | Plastic material: | UL94VO flame retardant |
Temperature Range: | 0 to 40°C | Dimensions: | 89mm x 89mm x 47mm |
|
| ||
Humidity Range: | 0% to 90% Relative Humidity | Weight: | 170g |
|
| ||
|
| Warranty: | 5 year (limited) warranty |
Interconnect: | Up to 12 interconnected |
|
|
| Ei141/144/146/151TL/154TL/ |
|
|
| 156TL/156TLH/156TLR/161RC/ |
|
|
| 164RC/166RC alarms |
|
|
Specifications are subject to change
Installation
Mains Powered Systems
Be very careful about correctly wiring the alarms as mixing Live and Neutral will blow/damage interconnected alarms
9Volt Battery Powered Systems
Use only with Ei100C/100TYC/100TYCH/103C/105C/105CH/105TYC/3105TYC Smoke/Heat Alarms
Important Precaution:
Do not install the actual smoke/heat alarm itself in new or renovated buildings until all work is completed (including floor coverings) and the building has been fully cleaned. The wiring can be installed when appropriate. (Excessive dust and debris from building work can contaminate the smoke chamber and cause problems, and it will also invalidate the guarantee). If it must be installed, cover it completely, particularly around the edges, with a dust cover (eg. a plastic bag), until all cleaning is finished.. Connect wires to the unit as in wiring diagram. All wiring must comply with local codes.
Shannon Free Zone, Shannon, Co. Clare, Ireland. Ph.+353 61 471277 Fx.+353 61 471053 Email. eielectronics@eiltd.ie
Web: www.eielectronics.com
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice. | Ei159 DataSht RevA |