Enterasys Networks XSR-1805, XSR-1850, XSR-3250 manual Copyright 2003 Enterasys Networks Page 9

Page 9

•Ten status LEDs

•One power connector

•One power switch

•One default configuration button

The XSR-1850 implements the same physical ports as the XSR-1805 and the following additional ones:

•External power source connector

•PPMC slot for Processor

The XSR-3250 varies to the XSR-1805 modules as follows:

•One additional power source connector

© Copyright 2003 Enterasys Networks Page 9 of 25

This document may be freely reproduced and distributed whole and intact including this Copyright Notice.

Image 9

Contents Fips 140-2 Non-Proprietary Security Policy Table of Contents References PurposeDocument Organization Copyright 2003 Enterasys Networks Page 3Copyright 2003 Enterasys Networks Page 4 Copyright 2003 Enterasys Networks Page 5 OverviewCryptographic Module Copyright 2003 Enterasys Networks Page 7 EMI/EMC Module InterfacesSelf-tests Design Assurance Mitigation of Other Attacks Copyright 2003 Enterasys Networks Page 8Copyright 2003 Enterasys Networks Page 9 Copyright 2003 Enterasys Networks Page 10 Module Physical Ports Fips 140-2 Logical InterfaceCopyright 2003 Enterasys Networks Page 11 Roles and ServicesSnmp SSHVPN Authenticate to the module during IKE. This IKECopyright 2003 Enterasys Networks Page 14 Physical Security Algorithm using a 1024 bit key pairOperational Environment Mechanism is as strong as the RSACryptographic Key Management Fips 186-2 Prng Copyright 2003 Enterasys Networks Page 18 Copyright 2003 Enterasys Networks Page 19 Copyright 2003 Enterasys Networks Page 20 Self-TestsDesign Assurance Mitigation of Other AttacksCopyright 2003 Enterasys Networks Page 21 Copyright 2003 Enterasys Networks Page 22 Crypto Officer GuidanceCopyright 2003 Enterasys Networks Page 23 Enter copy running-config startup-configCopyright 2003 Enterasys Networks Page 24 User GuidanceCopyright 2003 Enterasys Networks Page 25 XSR