Encore electronic ENDSL-A2+WIG2 manual Web Based Management, Interface, LED Indicators, Antenna

Page 4

Web Based Management

Web-based GUI Configuration / Management

Command-line Interpreter (CLI)

Telnet Remote Management

Firmware upgrade via FTP / TFTP

Support SNMP V.1 and V.2C

Built-in Diagnostic tool and IP Ping

TR-069, CPE WAN Management Protocol

Interface

Four RJ45 ports compatible with IEEE 802.3/802.3u, 10/100Mbps auto selection

One RJ11 port for ADSL connection

One power switch button

One reset button for restoration of factory default setting

LED Indicators

Power, LAN, ADSL, LANx4

Antenna

One external antenna

Wireless Frequency

2.400~2.4835 Ghz

Receiver Security

IEEE 802.11b: -84 dBm (typical), IEEE 802.11g: -60 dBm (Typical)

Transmit Output Power

11b : 19±1 dBm, 11g : 15±1 dBm

Power Adapter

Power Adapter: Input 110 ± 10 or 230 ± 10 VAC, Output 12VAC 1000mA

Dimensions (approximate)

160 mm (Length) x 130 mm (Width) x 24 mm (Height)

Net Weight (approximate)

320g

Operating Temperature

0°C ~ 45°C

Humidity

5% ~ 95% (Non condensing)

Image 4
Contents ENDSL-A2+WIG2 Adsl Compliant ATM and PPP ProtocolsBridging and Routing IP ManagementWlan Network SecurityLED Indicators Wireless FrequencyTransmit Output Power Power AdapterSupported Operating System Storage TemperatureRegulations