Encore electronic ENUWI-G2 manual Unpacking And Setup

Page 4
UNPACKING AND SETUP

UNPACKING AND SETUP

This chapter provides unpacking and setup information for ENCORE 802.11g Wireless USB 2.0 Adapter.

Unpacking

Open the box of ENCORE 802.11g Wireless USB 2.0 Adapter and carefully unpack it. The box should contain the following items:

‹One 802.11g Wireless USB 2.0 Adapter

‹One Driver & Utility CD-ROM

If any item is found missing or damaged, please contact your local reseller for replacement.

Setup

The setup of ENCORE 802.11g Wireless USB 2.0 Adapter can be performed using the following steps:

‹Visually inspect the USB connector and make sure that it is fully plugged in to the system’s USB port.

‹Make sure that there is a well environment that there is no much intrusion to have a better connection.

2

Image 4
Contents ENUWI-G2 802.11g Wireless USB 2.0 Adapter User’s Guide TABLE OF CONTENT INTRODUCTION Overview of this User’s GuideSetup UNPACKING AND SETUPUnpacking HARDWARE INSTALLATION LED IndicatorCheck the installation LINKSOFTWARE INSTALLATION 2. Click “Finish” to finish the installation Page WIRELESS UTILITY SETTING Link InfoConfiguration Advanced Shared Key/Open System WPA-PSK / WPA2-PSKWPA / WPA2 Site Survey Available NetworkProfile AboutGeneral TECHNICAL SPECIFICATIONSPhysical and Environmental