Enterasys Networks RBT-1002-EU, RBT-1602, TRPZ-MP-372-CN, RBT-8210 manual Introduction, Support

50 Minuteman Road

Andover, MA 01810 (USA)

Tel: (978) 684-1000

CUSTOMER RELEASE NOTES

Enterasys RoamAbout ® Wireless Switch 8xx0 Release

Firmware Version 7.0.7.3

January 21, 2009

INTRODUCTION:

The RBT-8xx0 family of wireless switches include the following: 1) the RBT-8100 and RBT-8110, which have the ability to control up to 24 access points; 2) the RBT-8200 and RBT-8210, which have the ability to control 24/48/72 access points; 3) the RBT-8400, which has the ability to control 40/80/120 access points; and 4) the new RBT-8500 which can control 32/64/96/128 access points. The RoamAbout Switch Manager (RASM) can manage all of these devices.

The 7.0.7.3 Firmware release addresses firmware modifications and customer escalations (refer to the Firmware and Enhancements section).

Enterasys recommends that you thoroughly review this document prior to installing or upgrading this product.

NOTE: The following table provides the access points and features supported by the Wireless Switch 8xx0 Firmware Version 7.0.7.3

NOTE: Enabling Direct Path Forwarding (also known as local switching) for a given AP affects the number of ACEs that can be applied within a single ACL policy to a user connecting to that AP. When local switching is enabled on an AP in version 6.0.5.1 or greater of RAS firmware, up to 25 ACEs in an ACL policy can be applied to a user of that AP. Please refer to the Firmware Changes and Enhancements section for more information.

F0615-O