Before Installing the Unit

Transport Lock Screws

The mechanism in the CD changer is "locked" into place during shipment by the transport screws. Be sure to remove the screws prior to installation.

Caution

After removing the transport lock screws, place the supplied seals over the screw

holes. These seals are used to keep dust out of the unit, which could cause a malfunction.

Installation and Wiring Precautions

1To prevent a short-circuit,

lBe sure to turn off the ignition and remove the negative (-) battery cable, prior to installation. lConnect power wires last.

Note

If the changer is to be installed in a car that is equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation, not to cause a short circuit.

2Do not install the unit in the following locations. lLocations exposed to direct sunlight. lWhere hot air is discharged from the car heater. lIn areas subject to extreme temperatures.

3Incorrect installation can cause the sound to "skip" when playing a disc. Mount the unit firmly in place, using the supplied brackets and screws.

Be careful not to damage the car wiring.

lBe sure to use the supplied screws.

lBe careful not to snag any wires when tightening screws.

lDo not use any of the screws that are part of the brake or steering system, to install the unit.

6lInstall the unit as closely to vertically or horizontally as possible. If the unit must be inclined, the angle must be 15° or less.

Installation and inclination angle

	Horizontal mounting		Vertical mounting

Installation

15° max.

Angle

7ID (Identity) Switch for 2nd CD Changer

When used with a compatible controller, an additional CD changer can be installed. When an additional CD changer has been attached in this fashion, the ID switch is used to indicate the number of each respective changer unit.

Changer Identity Switch

Do not use this switch if only 1 CD changer is being used.

Refer to the manual of the divider unit for further details on 2 changer operation.

Changer Identity Switch

none specifications

Shopsmith Inc. is widely recognized in the woodworking industry for its innovative multi-function woodworking tools. The company has defined a niche for itself by offering products that combine several woodworking machines into one versatile unit. This approach not only saves valuable space in workshops but also significantly reduces the cost for hobbyists and professionals alike.

One of the standout features of Shopsmith machines is their ability to transform seamlessly between different functionalities. For instance, a user can easily switch from a table saw to a drill press, lathe, or sanding machine, all within the same compact setup. This multi-tasking capability is especially appealing for woodworkers who may have limited workshop space or those looking to minimize their investment in equipment.

Technologically, Shopsmith incorporates several cutting-edge advancements that ensure performance and durability. Their products often feature a sturdy construction, typically using high-quality metals and reinforced plastics to withstand the rigors of woodworking operations. Additionally, Shopsmith's innovative power management systems provide robust performance while also being energy-efficient.

The precision of Shopsmith tools is another major feature that enhances their appeal. With adjustable settings and easy-to-use controls, users can achieve accuracy in their cuts, turnings, and presses. This precision is essential for producing high-quality woodworking projects, whether it's furniture building or intricate crafts.

Shopsmith also stands out with its commitment to safety and user-friendly designs. Many of their machines are equipped with safety features such as blade guards and push sticks, which are essential for preventing accidents during operation. The intuitive design of controls and settings makes their machines accessible for novice woodworkers while still meeting the demands of experienced craftsmen.

Moreover, Shopsmith provides extensive customer support and resources, including manuals, instructional videos, and online forums. This wealth of information helps users get the most out of their machines and fosters a community of woodworking enthusiasts.

In conclusion, Shopsmith combines innovative design, multi-functionality, and user-focused technology to create woodworking equipment that meets the diverse needs of woodworkers. Their commitment to quality and safety makes them a reliable choice for anyone looking to enhance their woodworking projects.