DeWalt AV200 manual Adapter Configuration Network Configuration, PHY Configuration

Page 24

Adapter Configuration

3.4.3.2 Network Configuration

Your Corinex AV200 Powerline Wall Mount can be configured to use either DHCP (automatic IP address assignment), or a fixed IP.

The following parameters are used by the fixed IP configuration. In order for the wall mount adapter to correctly communicate with other devices on the network, it is necessary to define a valid IP address, as well as a proper subnet mask and gateway address. These parameters will be saved in the wall mount adapter’s memory and activated at the next restart.

After changing any of these parameters, click “OK” to save your changes.

22

 

Note: Any change in the Network Settings requires a restart of the wall mount adapter to take effect.

Note: If you forget the IP address of the device, please recover it with the utility “getIP,” which is located on the Documentation CD, or download it from the Corinex website at www.corinex.com.

3.4.4PHY Configuration

By default, the wall mount adapter transmits over a frequency range anywhere from 2 to 32 MHz, and when an access network is detected, the wall mount adapter transmits over a range from 13.3 to 33.3 MHz, in order to avoid interference. This mode change is done automatically and cannot be configured by the user. It is only possible to enable or disable this “notches” function. The notches pre-defined in the wall mount adapter correspond to the IARU (International Amateur Radio Union) band plan for each world region. If the adapter is operating in an environment where it can cause interference to a HAM radio receiver, it is recommended to enable notches, in order to block the Powerline signal from the frequency bands used by radio amateurs.

Corinex AV200 Powerline Ethernet Wall Mount

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Manual Corinex AV200 Powerline Ethernet Wall Mount Corinex AV200 Powerline Ethernet Wall Mount CopyrightEnd User License Agreement Corinex Communications CorporationRegistration and Warranty Contents Introduction OverviewAbout this Manual IntroductionInstallation Package ContentsSystem Requirements Physical DescriptionFunctional Description Installation SYNC/ RST Buttton Obus Configuring a private powerline networkReleased Factory Reset Installation LED Definitions 2.4.3.1 VPI LED AP LEDTechnical Specifications Connecting the Wall Mount AdapterSchnittstellen EMC LimitsAdapter Configuration PasswordAdapter Configuration Main Additional Information System InformationPHY Status Priority Status Change Configuration OverviewBasic Settings Advanced Configuration MAC ConfigurationWith each other Types and their Network Identifiers Network Id Home Adapter Configuration Network Configuration PHY ConfigurationMulticast Configuration Adapter Configuration Vlan Configuration Priority ConfigurationAdapter Configuration Security Configuration Adapter Configuration Tools Adapter Configuration Flash Upgrade Firmware upgrade using a Tftp ServerOpen TFTPD32 Corinex AV200 Powerline Ethernet Wall Mount Configuring Video Applications InternetFirmware Update Pattern 1 and Class PriorityVideo Network Setups Video Network SetupsIntroduction Network ScenariosSingle-Network Scenarios Multi-Network Scenarios InternetTwo Networks on Different Circuits Two Networks on the Same CircuitNetwork Configuration Setting an IP Address on your ComputerSetting Up a Static IP in Windows Vista Network Configuration Network Configuration Setting Up a Static IP in Windows XP Corinex AV200 Powerline Ethernet Wall Mount Setting up a static IP in Windows Network Configuration Setting Up a Static IP in Linux Network Configuration Setting up a static IP in Mac OS Network Configuration Improving Network Performance Using Powerline Filters Checking Network PerformancePowerline Domain Troubleshooting Guide Wall Mount adapters

AV200 specifications

DeWalt AV200 is a professional-grade audio-visual technology designed for versatility and high performance, suitable for a variety of construction and job site environments. This innovative tool combines powerful audio capabilities with rugged durability, making it an essential addition to any contractor’s toolkit.

One of the standout features of the DeWalt AV200 is its high-output speakers, which deliver clear sound even in noisy environments. The system includes dual 20-watt speakers that provide a robust audio experience, enabling users to enjoy music or listen to important announcements without distortion. Whether on a construction site, in a workshop, or at an outdoor event, the AV200 ensures that audio quality remains uncompromised.

In addition to its impressive sound output, the DeWalt AV200 is equipped with Bluetooth connectivity, allowing users to seamlessly connect their smartphones, tablets, or other Bluetooth-enabled devices. This feature enhances convenience, giving users the freedom to stream music or access hands-free calls without being tethered to a device. With a Bluetooth range of up to 100 feet, users can maintain a connection even at a distance, making it perfect for large job sites.

Durability is another key characteristic of the DeWalt AV200. Designed with a rugged exterior, it can withstand harsh job site conditions, including exposure to dust, moisture, and impacts. Its reinforced corners and solid construction ensure longevity, making it a reliable choice for professionals who demand performance in challenging environments.

The DeWalt AV200 also features a long-lasting battery, providing up to 15 hours of playtime on a single charge. This extended battery life allows users to work throughout the day without worrying about recharging, making it ideal for lengthy projects or outdoor work.

Another notable aspect of the AV200 is its user-friendly interface. It features large, intuitive controls that facilitate easy operation, even when wearing gloves. Additionally, the system includes an auxiliary input for connecting non-Bluetooth devices, ensuring compatibility with a wide range of audio sources.

Overall, the DeWalt AV200 stands out as a versatile audio-visual tool that combines performance, durability, and user-friendly features, making it a vital asset for any professional. Its ability to deliver high-quality sound in demanding environments, along with its robust construction and convenient connectivity options, sets it apart as an exceptional choice for those in the construction and trades industries.
Top Page Image Contents