Digi W R 2 1 manual Cellular Cdma, Mobile Cdma Provisioning

Page 12

Digi TransPort® WR21 Installation Guide

The Quick Start Wizard is located in the Getting Started section on the Home menu.

4.2.1 Cellular: CDMA

If your unit is to be used on a CDMA network, the embedded module must be provisioned on the network before it can make a connection.

Note: If your unit uses a Gobi module (indicated by a model number of WR21-U5xx-xxx-xx), and you did not select the appropriate CDMA carrier via the Quick Start Wizard, you must run the GOBI Module Carrier Wizard before provisioning can be successfully completed.

To provision the CDMA mobile device, navigate to the CDMA Provisioning section by clicking on Network >

Mobile > CDMA Provisioning.

Page 12

Image 12

Contents A n s P o r t W R 2 Safety Notices DisclaimerDigi Technical Support Contact Information Special notes on safety for wireless routers Table of Contents Package Contents Introduction PrefaceFront Panel Features Reset instructionsRear Panel Features Installation Mounting TipsConnect the Power Supply PwrGndConfiguration Network SettingsWeb Interface Cellular Cdma Mobile Cdma ProvisioningCellular GSM Command Line Interface CLI Command DescriptionSets the Eth 0 IP address Sets the Eth 0 subnet maskRemoves the minimum IP address that will be server via DHCP, disabling the Dhcp serverNumber of IP addresses in the Dhcp pool DNS server Dhcp clients should useTroubleshooting Troubleshooting ResourcesUnable to open the Web Interface Unable to log in to the Web InterfaceSpecifications Specifications Digi TransPort WR21Accessories Appendix a Serial 0 Port Pin-out Diagram RS232RS422/ RS485 Features Standard Enterprise includes Standard feature set Appendix B Software OptionsStandard Version Firewall Advanced Version Firewall ECDeclaration Of Conformity Declaration of ConformityProduct Disposal Instructions Copyright 1P90002024-88 B