Digi 62533 manual Technical Support USA, TB-6128 Page 7 Revision 10/06

Page 7

TECHNICAL SUPPORT:

USA

Semtronics

3651 Walnut Avenue

Chino, CA 91710

Tel: (909) 627-8178

Fax: (909) 627-7449

NOTE: Unauthorized servicing or modifications to your monitor will void the product warranty and may create dangerous conditions. Servicing should be performed only at the factory, or by a Semtronics approved technician.

LIMITED WARRANTY

Semtronics expressly warrants that for a period of one (1) year from the date of purchase Semtronics 62533 will be free of defects in material (parts) and workmanship (labor). Within the warranty period, a unit will be tested, repaired, or replaced at our option, free of charge. Call Customer Service at 909- 627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for Return Material Authorization (RMA) and proper shipping instructions and address. Include a copy of your original packing slip, invoice, or other proof of date of purchase. Any unit under warranty should be shipped prepaid to the Semtronics factory. Warranty replacements will take approximately two weeks.

If your unit is out of warranty, Semtronics will quote repair charges necessary to bring your unit up to factory standards. Call Customer Service at 909-627-8178 for proper shipping instructions and address. Ship your unit freight prepaid.

WARRANTY EXCLUSIONS

THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, operator error, or failure to properly maintain, clean or repair products.

LIMIT OF LIABILITY

In no event will Semtronics or any seller be responsible or liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, users shall determine the suitability of the product for their intended use, and users assume all risk and liability whatsoever in connection therewith.

TB-6128Page 7 of 7

Revision 10/06

© 2005 DESCO INDUSTRIES INC. Employee Owned

Image 7
Contents TB-6128Page 1 Revision 10/06 Installation and Operating InstructionsTB-6128 Page 2 Revision 10/06 Description PackagingSystem and Hardware Requirements Mounting and InstallationPowering unit and Locating unit on the LAN PackagingTB-6128 Page 4 Revision 10/06 Assigning IP Address via Installation CDConnecting Digi One Sp Hardware to Smartlog Adding Hardware Multi-port Serial Adapter in WindowsTB-6128 Page 5 Revision 10/06 OperationTroubleshooting Specifications and DimensionsTB-6128 Page 6 Revision 10/06 TB-6128 Page 7 Revision 10/06 Technical Support USA