CyberPower Systems PR1000LCDRTXL2U user manual Limited Warranty and Connected Equipmen Guarntee

Page 2

LCD STATUS AND SETUP FUCTIONS

CYBERPOWER GREENPOWER UPS™ TECHNOLOGY

1.General Mode:

a. Press the “Display” button to check the status of the UPS. b. Press and hold the Display toggle for 4 seconds,

-If the machine is in the Battery Mode, it enters the status of Mute.

-If the machine is in the Line Mode, it proceeds Self Test.

c. If the Display toggle remains untouched for over 30 seconds, the LCD backlight will turn off automatically.

2.Set-up Mode

Step 1: The machine enters Set-Up Mode after holding the Display toggle for 10 seconds. Icon 3,4,5,6,7,8 lights to indicate Set-Up Mode.

Step 2: By pressing the Display toggle, users can switch between setup functions. User configurable functions are as follows:

 

Item

Unit

1

Input Voltage

V

2

Output Voltage

V

3

Output Frequency

Hz

4

Load

Kw

5

Estimate Run Time

Min

6

Load Capacity

%

7

Battery Capacity

%

8

Centigrade

9

Fahrenheit

GreenPower UPS™

The CyberPower GreenPower UPS™ cuts UPS energy costs by up to 75% compared to the conventional UPS circuits. Conventional UPS systems pass power through a transformer to provide normal output voltage to protected devices. By contrast, the GreenPower UPS™ circuitry bypasses the transformer when utility power is normal, significantly increasing the power efficiency of the UPS. As a result, a GreenPower UPS™ produces less heat and uses less energy reducing energy costs.

When utility power is abnormal, the GreenPower UPS™ operates like a normal UPS. Since utility power operates normally 88% of the time, the GreenPower UPS™ operates primarily in its cost-cutting bypass mode.

LIMITED WARRANTY AND CONNECTED EQUIPMEN GUARNTEE

Read the following terms and conditions carefully before using the CyberPower PR1000LCDRT2U/PR1000LCDRTXL2U/PR1500LCDRT2U/ PR2200LCDRT2U (the "Product"). By using the Product you consent to be bound by and become a party to the terms and conditions of this Limited Warranty and Connected Equipment Guarantee (together referred to as this "Warranty"). If you do not agree to the terms and conditions

a.Delay Time: The time delay between switching from Battery Mode to Line Mode. There are 9 different settings. The default setting is 0 minutes.

b.Battery Pack Numbers: This function provides the estimated UPS runtime using various numbers of battery packs. The default setting is 0.

c.Static Frequency Tolerance: There are 6 settings. The default setting is +/-6%.Functional description: The setting may be adjusted to the quality of the electricity in use

d.Slew rate: also called Dynamic Frequency Tolerance. There are 5 different settings. The fault value is 4Hz/sec. Functional

Description: “Slew Rate” indicates the tolerance of a device in accepting frequency variance. The lower “Slew Rate” results in less tolerance but better protection for the connected loads.

e.Battery Shutdown Voltage: This function adjusts the UPS shutdown point according to the battery voltage.

The settable items are sorted by unit as in the following table

 

 

Step 3: Press and hold the toggle for 4 seconds. When the icons blink, the value of

 

 

Items

Unit

each item can be changed by slightly pressing the toggle.

Delay Time

Min

Step 4: To save the value and return to general mode, press and hold the toggle for

4 seconds.

Battery Pack Numbers

A

Note: If the machine is left idle for over 30 seconds during setup, it will turn

Static Frequency Tolerance

%

Slew Rate

Hz

off the backlight and return to general mode automatically.

Battery Shutdown Voltage

V

 

Note: If user wants to return to general mode without saving changes, there are two methods:

1.Wait for the backlight to turn off

2.Press and hold the “Display” toggle for 10 seconds

TROUBLE SHOOTIMG

 

Problem

 

Possible Cause

 

Solution

 

 

 

 

 

Circuit breaker has tripped

 

Turn the UPS off and unplug at least one piece of equipment.

 

 

 

 

Wait 10 seconds, reset the circuit breaker by depressing

the

 

 

 

due to an overload.

 

 

 

 

 

button, and then turn the UPS on.

 

 

 

 

 

 

 

 

 

 

Outlet do not provide power

 

Batteries are discharged

Recharge the unit for at least 4 hours

 

 

 

 

Unit has been damaged by a

 

Contact CyberPower Systems about replacement batteries at

 

to equipment

 

 

 

 

surge or spike.

 

tech@cpsww.com

 

 

 

 

 

 

 

 

 

 

 

Uncritical outlets have

 

 

 

 

 

 

 

turned off automatically

 

Push the toggle button to make the uncritical outlets turn on.

 

 

 

 

due to an overload

 

 

 

 

 

The UPS does not perform

 

Battery not fully charged.

Recharge the battery by leaving the UPS plugged in.

 

 

 

 

 

 

 

 

 

 

expected runtime.

 

Battery is degraded

 

Contact CyberPower Systems about replacement

batteries

at

 

 

 

 

tech@cpsww.com

 

 

 

 

 

 

 

 

 

 

 

 

The on/off switch is designed

 

Turn the UPS off. Wait 10 seconds and then turn the

 

 

 

 

 

to prevent damage by rapidly

 

 

 

 

 

 

 

UPS on.

 

 

 

 

 

turning it off and on.

 

 

 

 

 

 

 

 

 

 

 

The UPS will not turn on.

 

The unit is not connected to

 

The unit must be connected to a 110/120v outlet.

 

 

 

 

an AC outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

The battery is worn out.

 

Contact CyberPower Systems about replacement

batteries

at

 

 

 

 

tech@cpsww.com

 

 

 

 

 

 

 

 

 

 

 

 

Mechanical problem.

Contact CyberPower Systems at tech@cpsww.com

 

 

 

 

 

 

 

 

 

 

 

The serial cable or USB cable

 

Connect the cable to the UPS unit. You must use the cable that

 

 

 

is not connected.

 

came with the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

The cable is connected to the

 

Try another port of your computer

 

 

 

PowerPanel® Personal

 

wrong port.

 

 

 

 

 

 

 

 

 

 

 

 

 

Shutdown your computer and turn the UPS off. Wait

10

 

Edition is inactive

 

The unit is not providing

 

 

 

 

 

seconds and turn the UPS back on. This should reset

 

 

 

 

battery power.

 

 

 

 

 

 

the unit.

 

 

 

 

 

 

 

 

 

 

 

 

The serial cable is not the

 

You must use the cable included with the unit for the

 

 

 

 

 

cable that was provided

 

 

 

 

 

 

 

software

 

 

 

 

 

with the unit.

 

 

 

 

 

 

 

 

 

 

 

Additional troubleshooting information can be found at www.cyberpowersystems.com/support.htm

 

TECHNICAL SPECIFICATIONS

Model

PR1000LCDRT2U

PR1500LCDRT2U

 

 

PR2200LCDRT2U

PR1000LCDRTXL2U

Capacity(VA)

1000

1500

 

 

2170

1000

Capacity(Watts)

700

1000

 

 

1600

700

Input

 

 

 

 

 

 

Input Voltage Range

 

80Vac-150Vac

 

Input Frequency Range

 

50/60Hz+/-3Hz(auto sensing)

 

Output

 

 

 

 

 

 

On Battery Output Voltage

 

Pure Sine Wave at 120Vac+/-7%

 

On Battery Output Frequency

 

50/60+/-1%

 

Transfer Time(Typical)

 

 

4 ms

 

Overload Protection

On Utility: Circuit Breaker, On Battery: Intemal Current Limiting

Surge Protection and Filtering

 

 

 

 

 

 

Lightning/Surge Protection

 

 

Yes

 

Internet Ready(DSL/Phone/

 

RJ11/RJ45(One In/One Out)

 

FAX/Modem Protection)

 

 

 

 

 

 

 

 

Physical

 

 

 

 

 

 

Output Receptacles

 

8

 

 

 

6

Dimensions(cm)

 

2U Rack, 43.3 x 8.8 x 38.8

 

Weight (Kg)

26.6

27

 

30

30

Battery

 

 

 

 

 

 

Sealed Maintenance Free Lead

12V / 7.0AHx4

 

 

12V / 9.0AHx4

12V / 9.0AHx4

Acid Battery

 

 

Extended runtime

 

 

 

 

 

Hot Swappable Extemal Battery

 

 

Yes

 

Warning Diagnostics

 

 

 

 

 

 

Indicators

Power On, Wiring Fault, LCD Display (Using Battery, AVR, Load Level, Battery Level)

Audible Alarms

 

On Battery, Low Battery, Overload

 

Environmental

 

 

 

 

 

 

Operating Temperature

 

32to 104( 0to40)

 

Operating Relative Humidity

 

0 to 95% Non-Condensing

 

Communication

 

 

 

 

 

 

PowerPanel ®Business Edition

 

Windows 98/ME/NT/2000/XP, Vista

 

 

 

 

 

 

 

 

 

 

 

Management

 

 

 

 

 

 

Self-Test

 

Manual Self-Test

 

Auto-Charger/ Auto-Restart

 

 

Yes

 

COM Interface

 

True RS232 x1+ Contact Closure x1

 

Built-in USB Interface

 

 

Yes

 

SNMP/ HTTP Network Slot

 

 

Yes

 

Safety Approvals

 

UL1778,cUL107,FCC/Doc Class B

 

of this Warranty, you should return the Product for a full refund prior to using it.

Who is Providing this Warranty?

CyberPower Systems (USA), Inc. ("CyberPower") provides this Limited Warranty.

What Does This Warranty Cover?

This warranty covers defects in materials and workmanship in the Product under normal use and conditions. It also covers equipment that was connected to the Product and damaged because of the failure of the Product.

What is the Period of Coverage?

This warranty covers the Product for three years and connected equipment for as long as you own the Product.

Who Is Covered?

This warranty only covers the original purchaser. Coverage ends if you sell or otherwise transfer the Product.

How Do You Get Service?

1.Call us at (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379 or send us an e-mail message at claims@cpsww.com for instructions.

2.When you contact CyberPower, identify the Product, the Purchase Date, and the item(s) of Connected Equipment. Have information on all applicable insurance or other resources of recovery/payment that are available to the Initial Customer and Request a Claim Number.

3.You must provide a dated Proof-of-Purchase receipt (or other proof of the original purchase) and provide a description of the defect.

4.Pack and ship the product with a dated Proof- of-Purchase receipt to CyberPower and, if requested, the item(s) of Connected Equipment, a repair cost estimate for the damage to the Connected Equipment, and all claim forms that CyberPower provides to you. Show the Claim Number on the shipping label or include it with the product. You must prepay all shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate.

How Long Do I Have To Make A Claim?

All claims must be made within ten days of the occurrence.

What Will We Do To Correct Problems?

CyberPower will inspect and examine the Product.

If the Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required).

If it appears that our Product failed to protect any equipment plugged into it, we will also send you forms for making your claim for the connected equipment. We will repair or replace the equipment that was damaged because of the failure of our Product or pay you the fair market value (NOT REPLACEMENT COST) of the equipment at of the time of the damage. We will use Orion Blue Book, or another a third-party valuation guide, or eBay, craigslist, or other source to establish that amount. Our maximum liability is limited to $400,000 for PR1000LCDRT2U/ PR1000LCDRTXL2U/ PR1500LCDRT2U/ PR2200LCDRT2U.

Who Pays For Shipping?

We pay when we send items to you; you pay when you send items to us.

What Are Some Things This Warranty Does Not Cover?

1.This Warranty does not cover any software that was damaged or needs to be replaced due to the failure of the Product or any data that is lost as a result of the failure or the restoration of data or records, or the reinstallation of software.

2.This Warranty does not cover or apply to: misuse, modification, operation or storage outside environmental limits of the Product or the equipment connected to it, nor for damage while in transit or in storage, nor if there has been improper operation or maintenance, or use with items not designed or intended for use with the Product, such as laser printers, appliances, aquariums, medical or life support devices, etc.

What Other Limitations Apply?

1.This Warranty does not apply unless the Product and the equipment that was connected to it were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors.

2.The Product must have been plugged directly into the power source and the equipment connected to the Product must be directly connected to the Product and not "daisy-chained" together in serial fashion with any extension cords, another Product or device similar to the Product, surge suppressor, or power tap. Any such installation voids the Limited Warranty.

3.The Product and equipment connected to it must have been used properly in a suitable and proper environment and in conformance with any license, instruction manual, or warnings provided with the Product and the equipment connected to it.

4.The Product must have been used at all times within the limitations on the Product's VA capacity.

What are the Limitations?

The sole and exclusive remedies of the Initial Customer are those provided by this Warranty.

The Product was designed to eliminate disrupting and damaging effects of momentary (less than 1ms) voltage spikes or impulses from lightning or other power transients. If it can be shown that a voltage spike lasting longer than 1ms has occurred, the occurrence will be deemed outside the rated capabilities of the Product and the Limited Warranty is void. CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following:

1.Loss of or damage to data, records, or software or the restoration of data or records, or the reinstallation of software.

2.Damage from causes other than AC Power Line Transients, spikes, or surges on properly installed, grounded and code-compliant 120 volt power lines in the United States and Canada; transients, surges or spikes on standard telephone land lines, PBX telephone equipment lines or Base 10T Ethernet lines, when properly installed and connected. (This exclusion applies, for example, to fluctuations in data transmission or reception, by CATV or RF transmission or fluctuations, or by transients in such transmission.)

3.Damage from any circumstance described as excluded above with respect to the Product.

4.Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, abuse, misuse or alteration of either the product or the Connected Equipment.

5.CyberPower excludes any liability for personal injury under the Limited Warranty and Connected Equipment Guarantee. CyberPower excludes any liability for direct, indirect, special, incidental or consequential damages, whether for damage to or loss of property [EXCEPT FOR (AND ONLY FOR) the specific limited agreement of CyberPower to provide certain warranty benefits regarding "Connected Equipment" under this Warranty], loss of profits, business interruption, or loss of information or data. NOTE: Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

6.The Product is not for use in high-risk activities or with aquariums. The Product is not designed or intended for use in hazardous environments requiring fail-safe performance, or for use in any circumstance in which the failure of the Product could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical or life support device (collectively, "High Risk Activities"). CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities or with aquariums. CyberPower does not authorize use of any Product in any High Risk Activities or with Aquariums. ANY SUCH USE IS IMPROPER AND IS A MISUSE OF

THE PRODUCT.

What is the Fine Print?

The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. CyberPower is the warrantor under this Limited Warranty.

For further information please feel free to contact CyberPower at Cyber Power Systems (USA), Inc. 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at (877) 297-6937; or send us an e-mail message at claims@cpsww.com.

FCC Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING!! This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna.

(2)Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction.

The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.

Cet appareil numerique de la class B respecte toutes les exigencies du Reglement sur le materiel brouilleur du Canada

Image 2
Contents Battery Replacement Important Safety WarningsInstalling Your UPS System Basic OperationTrouble Shootimg Limited Warranty and Connected Equipmen GuarnteeTechnical Specifications

PR1000LCDRTXL2U, K01-0000057-04, PR1500LCDRT2U, PR2200LCDRT2U specifications

CyberPower Systems has long been at the forefront of power protection solutions, offering a wide array of Uninterruptible Power Supply (UPS) systems that cater to varying power needs. Among their most notable products are the PR1000LCDRTXL2U, K01-0000057-04, PR1500LCDRT2U, and PR2200LCDRT2U models, which boast impressive features and technologies that ensure reliable power backup and protection for critical systems.

The PR1000LCDRTXL2U is designed to deliver 1000VA/700W of power. It features a multifunction LCD panel that provides real-time status updates on battery health, load capacity, and estimated runtime. The extended runtime capabilities allow users to add compatible external battery packs, thereby ensuring uninterrupted power during extended outages. This particular model is especially suited for network devices, telecommunications equipment, and critical servers.

Similarly, the K01-0000057-04 model is a versatile unit that stands out for its compact design and robust performance. It incorporates advanced Automatic Voltage Regulation (AVR) technology, which stabilizes voltage fluctuations, protecting sensitive electronics from damage. The unit also features multiple outlets for connecting various devices, making it an ideal choice for small businesses and home offices alike.

Moving up the power scale, the PR1500LCDRT2U provides 1500VA/1000W of capacity and similar advanced features as the PR1000LCDRTXL2U, including an intuitive LCD interface. With its high efficiency rating, this model not only protects connected devices but also helps save on energy costs. Its line-interactive topology adjusts voltage levels to provide optimal power conditions, thus prolonging the life of the connected equipment.

The PR2200LCDRT2U, offering 2200VA/1980W, is particularly suited for larger networks and servers. It features smart battery management technology that enhances battery performance and ensures maximum operational efficiency. The advanced management capabilities allow users to remotely monitor power status and control the UPS through USB or serial connections.

All four models support Eco-Friendly mode, which conserves energy by automatically shutting off unused devices. CyberPower's models also come equipped with various safety features, including surge protection, battery backup, and over-voltage protection, ensuring a safe environment for sensitive electronics.

In summary, by offering a blend of high capacity, advanced features, and energy efficiency, CyberPower Systems' PR1000LCDRTXL2U, K01-0000057-04, PR1500LCDRT2U, and PR2200LCDRT2U stand out as reliable choices for businesses and home users seeking dependable power protection solutions. Each model is designed to meet the specific power requirements while ensuring the protection and longevity of connected devices.