Lyngdorf Audio TDAI 2200 owner manual Technical Specifications, Audio

Page 34

Technical Specifications

Audio

Parameter

Value

Note

 

Balanced input connectors

3 pin XLR, gold-plated.

Case=Gnd,

Pin1=Gnd,

 

 

Pin2=Hot(+), Pin3=Cold(-)

Balanced input impedance

10kOhm

AC-coupled.

 

Unbalanced input connectors

RCA (phono) jack, gold-plated.

Case=Gnd, Tip=Hot(+)

Unbalanced input impedance

10kOhm

AC-coupled

 

 

 

 

DAC Out impedance

75 Ohm

Gain According to volume con-

 

 

trol setting. 88 dB = 0 dB with

 

 

sensitivity normal and rel. vol-

 

 

ume 0 dB

 

 

 

 

Input sensitivity

4.4V (2.2V with high sens.)

200W/8ohms/89 dB Volume

Power Supply Variation

26dB

65V to 3.3V dep. On Volume

Output connectors

4 insulated binding posts, gold-

Will accept bare wire ends of up

 

plated.

to 5 mm diameter.

 

Output power, 8ohms

2*200W

1KHz, 0.1% THD+N

 

Output power, 4ohms

2*375W

1KHz, 0.1% THD+N

 

Nominal load impedance

4 Ohms-8 Ohms

It is safe to operate the amplifier

 

 

with no load.

 

Frequency response

0.3Hz-33KHz

-3dB points, 8ohms load.

 

 

 

Frequency response

-0dB/+0.2dB

20Hz-20KHz, 8ohms load

Frequency response

-0.2dB/+0dB

20Hz-20KHz, 4ohms load

Output impedance

0.035 Ohms

20Hz-1KHz

 

Output impedance

0.4 Ohms

20KHz

 

 

 

 

 

THD+N, 1W/8ohms

0.015%

A-wgt.

 

THD+N, 1W/4ohms

0.02%

A-wgt.

 

THD+N, 100W/8ohms

0.008%

A-wgt.

 

THD+N, 180W/8ohms

0.01%

A-wgt.

 

 

 

 

 

THD+N, 375W/4ohms

0.07%

A-wgt.

 

S/N ratio

107dB

A-wgt. Ref. 200W/8ohms.

Dynamic range

133 dB

A-wgt. Ref. 200W/8ohms.

Channel separation

90dB

1KHz, 200W/8ohms.

 

 

 

 

 

Peak output current

±40A

 

 

Output common mode voltage

Max 33V DC

Ref. Ground. The amplifier can

 

 

not be used in bridged mono

 

 

mode.

 

Output DC voltage

±5 mV

 

 

All audio measurements, except frequency response, are measured with a 20KHz low-pass filter in ac- cordance with AES-17.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Tdai RoomPerfect Page Table of Contents Unpacking the Tdai Operating VoltageSerial Number Registration Introduction Accessories Front Panel ControlsRear Panel Display Indicators Lyngdorf TdaiRemote Control Menu System Navigating the menu systemMenu Tree Line Out Control Focus Listening Introduction to RoomPerfectGlobal Listening VoicingGuided Setup RoomPerfectSetting the Measurement Volume Level Focus Measurement Room MeasurementsAdding more Room Measurements Calculation of Focus 1 and Global Filters Measure Focus Pos Advanced OptionsMeasure Room Pos RoomKnowledge RoomCorrectionDisplay Display TimeoutVolume Disp. Timeo Disp. BrightnessDef. Vol VolumeMax. Vol Input Name Input SensitivityComm Address Advanced setupCommunication Comm SpeedLine Out Level Line OutLine Out Control RoutingCrossover frequency Filter typeDelay Trigger SetupFactory Reset Remote ControlSoftware versions RoomPerfect Troubleshooting Software upgrading Loudspeaker Connectors ConnectorsMains Connector Trigger ConnectorBalanced inputs Cleaning and MaintenanceOptional AD Converter Board Unbalanced inputsTechnical Specifications AudioTrigger ProtectionMains MechanicalTechnical Assistance Appendix Voicing CurvesPage
Related manuals
Manual 40 pages 38.13 Kb

TDAI 2200 specifications

Lyngdorf Audio has established itself as a leader in high-fidelity audio solutions, and the TDAI 2200 is a testament to their commitment to excellence. This integrated amplifier combines cutting-edge technology and exceptional sound quality, making it a popular choice among audiophiles and casual listeners alike.

At the heart of the TDAI 2200 is its powerful 2 x 200-watt amplification, which delivers a clean and distortion-free output. The amplifier is designed to drive a variety of speaker types, ensuring compatibility with different audio setups. This versatility allows users to enjoy their favorite music with remarkable clarity and precision.

One of the standout features of the TDAI 2200 is its RoomPerfect technology. This advanced room correction system automatically analyzes the acoustics of your listening space and adjusts the sound output accordingly. By compensating for room anomalies, it creates an optimal listening environment, ensuring that you experience the best possible sound quality regardless of your room's characteristics.

The TDAI 2200 also includes a built-in digital-to-analog converter (DAC) that supports high-resolution audio formats. This DAC enhances the overall audio experience by allowing users to enjoy their music in its purest form. The amplifier supports a wide range of digital inputs, including USB, optical, and HDMI, making it easy to connect to various multimedia devices.

Another key feature of the TDAI 2200 is its streaming capabilities. It supports various streaming services and offers Bluetooth connectivity, allowing users to easily stream their favorite music from smartphones, tablets, or computers. The integration of streaming features ensures that the TDAI 2200 fits seamlessly into modern audio setups.

Moreover, the user-friendly interface and intuitive design make it easy to operate the TDAI 2200. The customizable settings enable users to tailor the audio experience to their preferences, providing ultimate flexibility for different listening scenarios.

In conclusion, the Lyngdorf Audio TDAI 2200 stands out for its exceptional sound quality, sophisticated technologies, and user-friendly features. Whether you're an audiophile seeking precision or a casual listener looking for convenience, the TDAI 2200 promises an enriching audio experience that showcases the best of Lyngdorf Audio's engineering prowess.
Top Page Image Contents