Dell M2401G user manual Switch Status Lights, Led

M2401G 24 Port 20Gb/s InfiniBand Switch for the Dell M1000e Chassis User Manual

9

2.1.2Switch Status Lights

The switch Status lights indicate whether the switch is receiving power from the chassis.

Figure 3: Indicator LEDs

This LED can be Blue or

Amber. If it is blinking

Amber it indicates a Fault.

See Table 4.

Table 4 - IOM states and LED configurations:

8 Port number

When both the blue and green LEDs are lit this indi- cates that the IO Module is on and ready.

			LED
IOM State	Source
		Blue	Amber	Green
OFF	N/A	OFF	OFF	OFF
BOOT_IN_PROGRESS	IOM	OFF	OFF	ON
NORMAL/ STACK_MASTER	IOM	ON	OFF	ON
STACK_SLAVE Stackable	IOM	OFF	OFF	ON
IOM_FAULT (self-diagnosed)	IOM	OFF	BLINK	ON
			1HZ
IOM_FAULT (Misconfig or other CMC-detected fault)	CMC	OFF	BLINK	OFF
			1HZ
MODULE_IDENTIFY	CMC	BLINK	OFF	ON
		1HZ

Mellanox Technologies Rev 1.0