Lyngdorf Audio SDAI 2175 owner manual Cleaning and maintenance, Technical specifications Audio

Page 15

Cleaning and maintenance

Always unplug the unit from the electrical outlet before cleaning.

This unit does not require any regular maintenance except to keep its exterior clean. Simply wipe its exterior with a clean soft cloth. A small amount of non-abrasive cleaner may be used on the cloth to remove any excessive dirt or fingerprints. Do not use abrasive cleaners or cleaners containing liquid solvents.

Technical specifications

Audio

Parameter

Value

Note

Balanced input connectors

3 pin XLR, gold-plated.

Case=Gnd, Pin1=Gnd,

 

 

Pin2=Hot(+), Pin3=Cold(-)

Balanced input impedance

10kOhm

AC-coupled.

Balanced input CMRR

40dB

20Hz-20kHz.

Unbalanced input connectors

RCA (phono) jack, gold-plated. Case=Gnd, Tip=Hot(+)

Unbalanced input impedance

100kOhm

AC-coupled

Tape Out output impedance

75 Ohm

Gain 0 dB ref. active input

Pre Out output impedance

75 Ohm unbalanced

Gain According to volume

 

100 Ohm balanced

control setting. 88 dB = 0 dB

 

 

with sensitivity 0 dB and rel.

 

 

volume 0 dB

Max. input voltage

±12Vp AC, 0-20V DC.

 

Input sensitivity

2V (1V with high sens.)

200W/8ohms

Voltage gain

26dB

 

Output connectors

4 insulated binding posts, gold-Will accept bare wire ends of

 

plated.

up to 5 mm diameter.

Output power, 8ohms

2*200W

1KHz, 1% THD+N

Output power, 4ohms

2*375W

1KHz, 1% THD+N

Nominal load impedance

4 Ohms-8 Ohms

It is safe to operate the

 

 

amplifier with no load.

Frequency response

0.3Hz-33kHz

-3dB points, 8ohms load.

Frequency response

-0dB/+0.2dB

20Hz-20kHz, 8ohms load

Frequency response

-0.2dB/+0dB

20Hz-20kHz, 4ohms load

Output impedance

0.035 Ohms

20Hz-1kHz

Output impedance

0.4 Ohms

20kHz

THD+N, 1W/8ohms

0.004%

A-wgt.

THD+N, 1W/4ohms

0.006%

A-wgt.

THD+N, 100W/8ohms

0.01%

A-wgt.

THD+N, 180W/8ohms

0.07%

A-wgt.

THD+N, 375W/4ohms

0.07%

A-wgt.

- 15 -

Image 15
Contents Sdai Table of Contents Lightning symbol Explanation of graphical symbols Exclamation symbolUnpacking the Sdai Important safety instructionsAccessories Operating voltageProduct Registration Introduction Controls Front panelOperate IndicatorsSdai 2175 rear panel Rear panelMenu system Sdai 2175 Menu system Relvol SoftwareConnectors Mains Connector Balanced inputs Loudspeaker connectorsInput connectors Trigger connectorsTechnical specifications Audio Cleaning and maintenanceMechanical ProtectionMains TriggerSupport Technical assistance

SDAI 2175 specifications

Lyngdorf Audio SDAI 2175 is a remarkable integrated amplifier that combines cutting-edge technology with impeccable audio performance, catering to both high-fidelity enthusiasts and casual listeners alike. This sophisticated device, designed in Denmark, reflects the brand's commitment to excellence in audio reproduction, making it a standout choice in today’s competitive market.

One of the main features of the SDAI 2175 is its powerful amplification capability. Delivering 2 x 175 watts at 4 ohms, the amplifier is well-equipped to drive a wide range of speakers, ensuring that users can enjoy rich, dynamic sound across varying volume levels. This level of power allows for clear reproduction of music, creating an engaging listening experience whether for subtle classical pieces or high-energy rock tracks.

The SDAI 2175 is equipped with Lyngdorf’s proprietary RoomPerfect technology, a significant innovation that automatically optimizes the sound performance based on the unique acoustics of the listening environment. This advanced speaker and room correction system effectively resolves frequency response issues, providing a more uniform sound across all listening positions. The result is a more immersive experience, allowing listeners to enjoy music as if they were in a live concert setting.

Another prominent characteristic is its versatility in connectivity. The SDAI 2175 includes a range of digital and analog inputs, including multiple HDMI, optical, and coaxial options, enabling seamless integration with various audio and video sources. This flexibility ensures that users can connect their TVs, streaming devices, and other equipment effortlessly while maintaining high-quality audio performance.

Additionally, Lyngdorf Audio emphasizes user-friendliness with an intuitive interface and remote control, making it simple for users to navigate settings and preferences. The design of the amplifier is sleek and modern, featuring a minimalistic aesthetic that can fit effortlessly into any home décor.

In summary, the Lyngdorf Audio SDAI 2175 is a high-performance integrated amplifier that brings together power, advanced technologies, and a user-friendly design. With features like RoomPerfect technology and extensive connectivity options, it delivers superior audio quality that meets the demands of both audiophiles and casual listeners. This amplifier not only elevates the listening experience but does so with elegance and sophistication, solidifying its place as a top choice for audio enthusiasts.