Edimax Technology EW-7108PCg, EW-7727In, EW-7318Ug, EW-7718Un, EW-7748In Cannot be changed, Channel

Page 72

Here are descriptions of every setup items:

SSIDPlease input the SSID (the name used to identify

 

this wireless access point) here. Up to 32

 

numerical characters can be accepted here,

 

excepting space.

TX Rate

Please select the data transfer rate here. The

 

maximum TX rate you can select here depends

 

on the wireless mode you’re using. It’s safe to

 

select ‘Auto’ to let wireless card select a proper

 

TX rate according to the strength and quality of

 

radio signal. When the wireless mode is set to

 

‘802.11 B/G/N Mix’, TX Rate will be set to ‘Auto’

 

and cannot be changed.

Channel

Please select the wireless channel you wish to

 

71

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Wireless LAN Adapter Series Copyright T a L O G Introduction and safety information Main FeaturesSafety Information System Requirements Package Contents EW-7728In EW-7108PCg / EW-7708PnFamiliar with your new wireless network card EW-7318UgLight Description EW-7318USg EW-7717Un EW-7718Un LED Name Light Description StatusEW-7108PCg EW-7708Pn LINK/ACT EW-7128g PCI Interface Antennas ‘Link’ LED ‘Tx / Rx’ LED WPS Button PCI Interface Antennas ‘Link’ LED ‘Tx / Rx’ LED EW-7748In Network Card Installation EW-7318USg/ EW-7318Ug / EW-7718Un / EW-7717UnEW-7128g/ EW-7727In/ EW-7728In / EW-7748In EW-7108PCg/ EW-7708Pn / EW-7738Pn Software Installation Procedures are operated in Windows XPPage Page Connect to Wireless Access Point 1Using Edimax Wireless UtilityPage Service Set Identifier of wireless access Can identify a single access point or wirelessWireless device uses Point does not enable encryption, you’ll seePage Page Page Page 2Using Windows Zero Configuration Page Page Page Make a profile for an access point or wireless device Connection Profile ManagementPage Ssid of the wireless access point or Please select CAM constantly awake modePower Saving ManuallyTo help the battery live longer Access point or wireless device, it’sManually here. Do not modify default setting It’s recommended to choose ‘PSM’ if you’rePage This field will be disabled and grayed out Will be disabled and grayed outDo not modify it NotPage Page Using 802.1x Certification When authentication type is not ‘EAP-FAST’ AuthenticationAuthentication type, the protocol setting is Domain Name Please input the domain nameHidden when the authentication type is not Using 802.1x CA Server Issuer Dropdown menu AllowMust match UtilityView Network Statistics and Link Status Network StatisticsClick ‘OK’ to close the window Link Status On the radio signal quality of wireless Extra Info Displays the link status ‘Link is up’ or Link isNetwork card Mbps and receiving Rx, in Mbps. LinkInstead of percentage Advanced Settings Set this setting to ‘Auto’ , since enabling this Setting will slightly reduce the data transferSignal quality. However, you can fix the data There’s some problem about data transfer, orWhen this wireless network card should Switch to another wireless access point withBetter signal quality. Only adjust value when When you can not be authenticated, and youTurn on Cckm Check this box to enable Cckm Cisco Wireless clients to roam betweenCCKM-enabled access points in very short Milliseconds Certain time. Default value isQoS Setting Save Enable Lets your battery live longer EnergyThis box, so corresponding settings in this Low Priority, Acbe Best Effort, AcviVideo First, and Acvo Voice First This check box after you check or uncheckWPS Configuration WPS Setup PBC Push-Button Configuration Page Page Page WPS Setup PIN Page About Please click ‘OK’ to close configuration utility Switch to AP Mode and Basic Configuration Chapter III Soft-AP FunctionPage Cannot be changed Wireless Mode Limit the type of wireless client allowed toRegion Code Available wireless channels you can use Code’Can select ‘Auto’ to let configuration utility to Decide to use wireless protection or not. YouWireless protection or not BeaconmsSecurity Settings On the authentication type you select. If you However, some older wireless clients don’tEncryption Please select an encryption mode. Available Type Able to read the data you transfer with properShow Password Check this box and the WPA pre-shared key If you want to use WEP 64 bits encryptionInput 5 characters if you select Ascii If you Want to use WEP 128bits encryption, pleaseAccess Control Address listed here to connect to this access Reject All Reject wireless clients with MACAccess point PointMAC address Input the MAC address of the wireless client You Hyphen requiredConnection table MAC Address Displays the MAC address of this wireless client Mode This wireless client StatusEvent Log Statistics Troubleshooting Chapter IV AppendixReboot the computer and try again Page What is the Ieee 802.11g standard? What is the Ieee 802.11b standard?What does Ieee 802.11 feature support? GlossaryWhat is Ad-hoc? What is Infrastructure?What is BSS ID? What is WEP?What is DSSS? What is FHSS? And what are their differences? What is Spread Spectrum?What is WMM? What is WMM Power Save? What is GI?What is STBC? What is WPS?Page Federal Communication Commission Interference Statement FCC and CE Compliance StatementsFCC Caution TTE Compliance StatementEU Countries Intended for Use

EW-7108PCg, EW-7738Pn, EW-7708Pn, EW-7318USg, EW-7727In specifications

Edimax Technology is a well-known brand in the networking industry, recognized for producing reliable and innovative wireless communication devices. Among its impressive lineup, the EW-7128g, EW-7717Un, EW-7728In, EW-7718Un, and EW-7318Ug stand out for their robust features and capabilities, making them suitable for both home and office environments.

The Edimax EW-7128g is a wireless 802.11g PCI adapter that offers seamless connectivity to existing WLANs. Supporting data rates of up to 54 Mbps, it provides a solid foundation for internet browsing and light streaming. One of its main features is its compatibility with 802.11b/g wireless standards, ensuring versatility in various network environments. Additionally, the EW-7128g is equipped with advanced security features such as WEP, WPA, and WPA2 encryption to protect user data and prevent unauthorized access.

Moving to the EW-7717Un, this compact USB wireless adapter is designed for those who need portability without sacrificing performance. It conforms to the 802.11n standard, delivering data rates of up to 150 Mbps. One of its notable characteristics is its support for 2T2R MIMO technology, which significantly enhances signal quality and range. This adapter is an ideal solution for users who want to upgrade their existing wireless capabilities with ease and efficiency.

The EW-7728In is another noteworthy model, designed as a wireless PCI Express adapter for desktop PCs. It supports 802.11n technology, enabling users to achieve rates of up to 300 Mbps. The EW-7728In features dual-band support, allowing users to select between 2.4 GHz and 5 GHz frequencies, optimizing performance depending on their specific needs. It also includes a detachable antenna that enhances signal reception and ensures stable connections.

The EW-7718Un is a powerful USB wireless adapter that also supports the 802.11n standard. Featuring a plug-and-play design, this device is particularly user-friendly, making it easy to set up and start using immediately. Its sleek, compact form factor makes it highly portable, catering to users who need reliable internet access across different devices.

Lastly, the EW-7318Ug is a versatile wireless USB adapter that combines advanced features with ease of use. It supports data rates of up to 300 Mbps and offers high wireless performance through its dual-band capability. Additionally, the EW-7318Ug boasts advanced security protocols, protecting users' connections while enabling them to enjoy uninterrupted internet access.

Together, these Edimax products offer a range of features, including enhanced data rates, improved range through MIMO technology, and widespread compatibility with existing wireless standards. Whether for home networking or office connectivity, these devices provide reliable performance suited to various user requirements.
Top Page Image Contents