Dell 5324 manual Defining Snmp View Settings

The following is an example of the CLI commands:

Console (config)# snmp-server enable traps

Console (config)# snmp-server trap authentication

Console# show snmp

Community-String Community-Access		View name	IP address
----------------	-----------------	---------	----------
public	read only	view-1	All
Community-String	Group name	IP address	Type
----------------	----------	----------	----

Traps are enabled.

Authentication-failure trap is enabled.

Version 1,2 notifications
Target	Type	Community	Version	Udp	Filter	To	Retries
Address				Port	name	Sec
-------	----	---------	-------	----	------	---	-------
Version 3 notifications
Target	Type	Username	Security	Udp	Filter	To	Retries
Address			Level	Port	name	Sec
--------	----	---------	--------	----	------	---	-------
				-	-

System Contact: Robert

System Location: Marketing

Defining SNMP View Settings

SNMP Views provides access or blocks access to device features or feature aspects. For example, a view can be defined which states that SNMP group A has read only (R/O) access to Multicast groups, while SNMP group B has read-write (R/W) access to Multicast groups. Feature access is granted via the MIB name, or MIB Object ID.

The Up and Down arrows allow navigating through the MIB tree, and MIB branches.

17