Recording from the Radio, Making a Live Recording

14-703.fm Page 9 Wednesday, June 30, 1999 4:56 PM

Recording from the Radio

1.Load a blank tape, or one you want to record over, into Deck 2.

2.Set TAPE (POWER OFF)/RADIO to

RADIO.

3.Set AM/FM/-STEREOto the de- sired band and rotate TUNING to tune to the desired station.

Note: Sometimes, AM broad- casts produce a whistling sound that you can hear while playing a recording. If you hear this sound, set DUBBING MIC/NORM/HIGH to

HIGH (AM BEAT CUT) to help reduce or eliminate it.

4.Press RECORD on Deck 2. RECORD and PLAY both lock down.

5.When you are finished, press STOP/EJECT on Deck 2 to stop the tape. RECORD and PLAY release.

Note: The deck automatically stops when the tape reaches the end.

Making a Live Recording

You can use the built-in microphone to make a live recording.

1.Load a blank tape, or one you want to record over, into Deck 2.

2.Set DUBBING MIC/NORM/HIGH to MIC.

3.Set TAPE (POWER OFF)/RADIO to TAPE (POWER OFF).

4.Place the system 2-3 feet from the live recording source.

5.Press RECORD on Deck 2. RECORD and PLAY both lock down.

Note: Press PAUSE on Deck 2 to temporarily stop recording. Press PAUSE again to resume recording.