40
Detailed Descriptions by Menu
Information
Information
Version
• Displays the current version of the firmware embedded in iAUDIO.
Memory (Used / Total Memory Capacity)
•Displays information on the flash memory in iAUDIO.
•You can check usage and total memory capacity.
•iAUDIO Flash Memory shares some parts with the system memory.
When you exclude the memory taken by the system that is required for normal operation of iAUDIO, the flash memory that is displayed may be less than its total capacity.
•For example, about 242MB is the normal capacity from 256MB products.
Battery (Remaining Battery Capacity)
• Displays the remaining capacity of the battery in iAUDIO as a V value.
|
| Troubleshooting | 41 | |
|
|
|
|
|
Symptom | Action | Description |
|
|
iAUDIO does not | Check if the HOLD button is in | When the HOLD button is in locked |
|
|
power on. | the locked position. | status, iAUDIO buttons do not work. |
|
|
| Try again after pushing the HOLD |
|
|
|
| button to OFF. |
|
|
|
| Check if the battery is loaded in | iAUDIO does not work if the polarity of |
|
|
| the right direction. | the battery is reversed. |
|
|
| Replace the battery with a new | iAUDIO does not work when the battery |
|
|
| one. | is exhausted. |
|
|
|
|
|
|
|
| Remove the battery and insert | Check if there are any foreign objects |
|
|
| it again. | obstructing contact with the battery and |
|
|
|
| remove them if there are any. |
|
|
There is no sound. | Check if there are any MP3 files | iAUDIO does not work when there are no |
|
|
| in memory. | saved files in it. |
|
|
| Check if the HOLD button is in | iAUDIO buttons do not work when the |
|
|
| locked position. | HOLD button is in locked status. |
|
|
| Try again after setting the HOLD |
|
|
|
| button OFF. |
|
|
|
FM Radio does not | FM Radio reception may not be good inside buildings, subways or moving cars. |
|
| |
work | Listening to FM Radio may be impossible in areas shaded from radio transmis- |
|
| |
| sions. |
|
|
|
| If FM Radio does not work in areas where radio reception is possible, the recep- |
|
| |
| tion module may be in error. In this case, please call one of our service centers. |
|
| |
Characters in LCD | Set the language of iAUDIO to English and ID3 tag to Filename, and retry. If |
|
| |
are distorted. | the problem persists, check the product with our service center. However, if the |
|
| |
| same symptom occurs in other iAUDIO products of the same model, it may be |
|
| |
| because iAUDIO was developed on Korean Windows and some special fonts or |
|
| |
| characters may be distorted. |
|
|
|
iAUDIO G3 | iAUDIO G3 |