VMA5091
INTRODUCTION
The Clarion VMA5091 is a
5" color LCD panel Headrest Mounting Bezel
2 Trim Rings for Easy Installation RCA Composite Video Input
Picture Control Button
ABOUT THE MANUAL AND WARRANTY
To start enjoying your new Clarion monitor, please read the instructions listed in this manual. Keep all instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty serv- ice. Also, save your original sales receipt as proof of purchase.
TABLE OF CONTENTS |
|
Precautions | 1 |
Description | 2 |
Package Contents | 2 |
Button and Connector Locations | 2 |
Wiring Precautions | 3 |
Installation | 3 |
Mounting Options | 4 |
Picture Adjustment | 4 |
Care and Maintenance | 4 |
Product Specs | 5 |
Notes | 6 |
PRECAUTIONS
The set is for use in DC 12V, negative ground vehicles.
Do not operate the set in ways other than described in this guide. Doing so may damage it and may void your warranty.
SAFETY FIRST! For rear seat use only. Do not install on dashboard or anywhere else that would permit monitor to be viewed by the driver. Monitor must never be used in any manner that will distract driver or interfere with the driver's safe operation of the motor vehicle.
Be careful not to run down the car battery while using the set with the car stopped.
Do not disassemble or modify the set. Doing so may damage it and voids your warranty.
Keep drinks and drops from umbrellas away from the set. Water may dam- age the internal circuitry.
Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 41º - 104º F.)