Furuno FELCOM 250, FELCOM 500 installation manual Antenna mast and mounting base

Page 11

1. HOW TO INSTALL THE UNIT

Antenna mast and mounting base

To get the best performance from the antenna electronics and mechanics, the antenna must be installed properly on a specially designed mast with suitable flange and rubber gasket. Below are guidelines for installation of the mounting mast and mounting base.

The mounting base should be parallel to the ship's waterline (tolerance: ±3°).

Weld a ground bolt of stainless steel to the mast (figure below). Connect the ground wire from the antenna unit to the ground bolt.

FELCOM 500

HOLE

DIA 12 mm (0.47")

254 mm (10")

360 mm (14.17")

254 mm (10")

360 mm (14.17")

[Mounting base]

Thickness:

Minimum 20 mm (0.79")

FELCOM 250

110mm

 

 

200 mm (7.87")

 

 

 

 

(4

 

 

 

.

 

 

 

33")

 

 

 

 

200 mm (7.87")

φ8

 

φ60 (φ2.36")

Fixing Hole

Cable Entry and Drain

[Mounting base]

Thickness:

Minimum 10 mm (0.39")

(4")

Weld a ground bolt

Approx. 100mm

cable gland of

 

M10x40 (same

direction of the the antenna unit)

φ139.8 (φ5.50")

Approx. 100 mm (4")

φ76.3 (φ3.00")

Weld a ground bolt M6x40

Weld an elbow pipe for the cable entrance. The inner diameter should be larger than the outer diameter of the cable.

Don't seal with putty.

[Antenna mast: Example]

Make a drain hole at the base of the pole.

[Antenna pole: Example]

5

Image 11
Contents AP-1 Iii00017097917 Safety Instructions System Configuration Optional Supply Standard SupplyEquipment Lists Select a location low in vibration Antenna UnitGeneral Secure unobstructed path in all directionsLocate away from passengers and crew Minimum distance from other antennas Mast strength Compass safe distanceOther mounting guidelines Guardrail, platformAntenna mast and mounting base Procedure Felcom 500 How to install the antenna unitHOW to Install the Unit Felcom 250 How to install the antenna unit Procedure HOW to Install the Unit Pole mount kit Type OP16-52, Code number Communication Unit How to install the CUIP Handset How to install by the flush mount Incoming Indicator optionHow to install on the bulkhead or bridge panel Cutout Dimensions Facsimile FAX-2820 Option Mounting location How to change modem settingsTelephone FC755D1 Option Label How to mountRemove the plastic sheet and recording sheet Standard Connection ConnectionsAntenna Cable Waterprooting the coaxial connectorHow to attach the antenna cable connector N-P-8DFB-CF How to attach the antenna cable connector N-SP-12DSFA-CF MJ-2S Telephone FC755D1 and Facsimile FAX-2820TTYCS-1 Cable fabrication Nmea signal, External alarmCable fixture Never connect as follows How to install the connector cover How to inset the grommetRaise App Rox m m Prox LAN Cable FabricationPreparation for Setting Setting After InstallationSetting After Installation Basic settings Settings GPS Setting Analog Port Setting Incoming Indicator Setting Serial Port Setting Satellite Setting OTA Setting Web software setting Handset SettingSetting in the IP handset Setting After Installation Setting After Installation Appendix 1 JIS Cable Guide #3  #3 70+6 # Modular jack box Page Mar/10 R.Esumi 11/Dec/09 R.Esumi 17/May/2010 Takahashi 17/May/2010 Takahashi 11/May/09 R.Esumi 18/Feb/09 R.Esumi 18/Feb/09 R.Esumi Page Matsuguchi +0/#45#6 .6 $41#&$#0

FELCOM 500, FELCOM 250 specifications

The Furuno FELCOM 250 and FELCOM 500 are two advanced satellite communication systems designed for maritime use. These systems provide robust, reliable, and versatile communication solutions for vessels operating in the ever-evolving maritime environment.

The FELCOM 250 is a compact and cost-effective satellite communication terminal that allows low-to-medium-speed vessels to maintain connectivity even in remote areas. One of its main features is its ability to support both voice and data services. It operates on the Inmarsat FleetBroadband network, providing seamless communication capabilities for crew welfare, operational data transmission, and more. The terminal is particularly valued for its easy installation and integration with existing shipboard systems, making it a popular choice for smaller vessels and fishing boats.

In contrast, the FELCOM 500 is built to cater to larger vessels with high-volume data requirements. It supports Inmarsat’s FleetBroadband and also offers enhancements with Iridium services for global coverage. This dual-functionality allows for greater flexibility and reliability in communications, which is crucial for ships in demanding environments. The FELCOM 500 is equipped with advanced features such as automatic beam switching and intelligent network management.

Both systems utilize the latest technologies to ensure high-quality communication. This includes advanced antenna design, which minimizes signal loss and enhances reception even in adverse weather conditions. Furthermore, the systems support multiple user interfaces, allowing for easier access and management of communications onboard.

Security is another important aspect of both the FELCOM 250 and 500. They include built-in firewalls and robust encryption protocols to ensure that sensitive ship information and communication remain secure from potential cyber threats. Additionally, these systems offer efficient power management, reducing the power consumption footprint on vessels.

With their user-friendly interfaces and effective maintenance solutions, the FELCOM 250 and 500 stand out as reliable satellite communication options. Their versatility and advanced technology make them suitable for a range of maritime applications, from commercial shipping to leisure boating. In an increasingly connected world, Furuno's satellite communication systems deliver crucial advantages in communication reliability, operational efficiency, and safety at sea.