Optimus SCP-90 owner manual Add

14-1233.fm Page 8 Friday, July 2, 1999 10:46 AM

•Always connect the adapter to the SCP-90’s DC 3V jack before you connect it to the AC outlet. Then disconnect the adapter from the AC outlet before disconnecting it from the SCP-90.

Follow these steps to power the SCP-90 from a stan- dard AC outlet.

1.Set the adapter’s voltage switch to 3V.

2.Put the adapter’s 3.4 mm outer diam-

eter/1.3	mm	inner	Add
diameter		barrel
plug	onto	the	Illust.

adapter’s cord so it reads –TIP.

3.Pull out the attached rubber plug from the SCP- 90’s DC 3V jack.

4.Insert the adapter’s barrel plug into the

SCP-90’s	DC 3V	Illust.
jack.

8