OPERATION
LOADING A CASSETTE TAPE
1.Take up any slack in the tape by turning one of the cassette’s hubs with a pencil.
PLAYING A CASSETTE TAPE
1.Load the cassette tape.
2.Press PLAY. The cassette plays until it reaches the end of the side, then it automatically stops.
MIC
RECORD
PLAY | REWIND |
STOP EJECT
PAUSE
Caution: If you do not remove the excess slack, the tape could become tangled in the record/ playback mechanism.
2.Press STOP/EJECT to open the cassette compartment door.
MIC
RECORD |
|
| STOP | PAUSE |
PLAY | REWIND | EJECT |
|
3.Load the cassette in the slot in the door with its open edge out, the side you want to play facing up, and its full reel to the left.
4. Close the door.
Notes:
•Press PAUSE to temporarily stop playback. Press PAUSE again to resume playback.
•To rapidly wind the tape forward or backward, press STOP/ EJECT, then
3.Adjust VOLUME as desired.
4.Press STOP/EJECT to completely stop playback before it automati- cally stops. Press STOP/EJECT again to open the cassette com- partment and remove the cassette tape.
7