7.9 | Report | 49 |
8. Web Management | 50 | |
8.1 | Introduction | 50 |
8.2 | Login | 51 |
8.3 | Device Status | 52 |
8.3.1 | System Status | 52 | |
8.3.2 | Printer Status | 53 | |
8.3.3 | TCP/IP Status | 54 | |
8.4 | Setup Wizard | 55 | |
8.4.1 | System | 55 | |
8.4.2 | TCP/IP | 57 | |
8.4.3 | Save Settings | 58 | |
8.5 | System Tools | 59 | |
8.5.1 | Load Default | 59 | |
8.5.2 | Upgrade Firmware | 60 | |
9. LPR Printing | 61 | ||
10. RAW Printing | 67 | ||
11. IPP Printing | 73 | ||
11.1 | Introduction | 73 | |
11.2 | System Setup | 73 | |
11.2.1 | MFP Server Side | 73 | |
11.2.2 | Client Side | 73 | |
12. MFP Server Installation in Windows 98SE/Me/NT | 78 | ||
12.1 | Software Installation | 79 | |
12.2 | Server Utilities | 86 | |
12.3 | Network Port Setup | 87 | |
12.4 | Add Printer | 88 | |
13. UNIX/Linux System Network | 92 | ||
13.1 | GUI Mode | 92 | |
13.2 | Console Mode | 96 | |
13.2.1 | Enable MFP Server’s TCP/IP Support | 97 | |
13.2.2 | Setup MFP Server’s IP Address | 97 | |
13.2.3 | Verify MFP Server’s IP Address | 99 | |
13.2.4 | Configure Remote LPD Printing on the Host | 100 | |