Freedom9 2420 user manual Features

Page 6

freeConnect Smart 2420 User’s Manual

Cost Reduction: VLANs can be used to create multiple broadcast domains, thus eliminating the need of expensive routers.

Port-based (or port-group) VLAN is the common method of implementing a VLAN, and is the one supplied in the Switch.

2.4Features

24x10/100Mbps Auto-negotiation Fast Ethernet ports

2x10/100/1000Mbps Auto-negotiation Gigabit Ethernet ports

2xmini-GBIC (shared with two Gigabit Ethernet ports)

All RJ45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port

Half duplex transfer mode for connection speed 10Mbps and 100Mbps

Full duplex transfer mode for connection speed of 10Mbps, 100Mbps and 1000Mbsps

Wire speed reception and transmission

Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity

Up to 8k unicast addresses entities per device, self-learning, and table aging

2Mbits packet buffer

Supports IEEE 802.3x flow control for full-duplex mode ports

Supports Port-based VLAN

Supports Port-based QoS / IEEE 802.1P based QoS

Supports Port-based Trunking

Supports Port-Mirroring

Supports Port-setting for Speed/Disable, Flow control

Easy configuration via Web Browser

Easy setting via Web Management Utility

Standard 19” Rack-mount size

3

Image 6
Contents FreeConnect Smart S102411200 RevCopyright and Trademark Information Table of Contents About This Guide PurposeTerms/Usage Fast Ethernet Technology IntroductionGigabit Ethernet Technology Vlan Virtual Local Area NetworkFeatures Unpacking Unpacking and InstallationInstallation Rack MountingConnecting Network Cable AC PowerIdentifying External Components Front PanelRear Panel Reset Ports 1~24 Status LEDs Understanding LED IndicatorsPower and System LEDs Ports 25~26 Status LEDs1000Mbp Discovery List ConfigurationInstalling the Web Management Utility Column Heading DefinitionsMonitor List System word definitions in the Monitor ListDevice Setting Trap InformationPassword Change ToolbarConfiguring the Switch LoginDevice Status Configuring Setup Setting Port SettingsMain Menu Speed/Disable Flow ControlVlan Settings Virtual Local Area Network Trunk SettingIngress and Egress Rates Mirror Setting Group 1 Ports Group 2 Ports Group 3 Ports 25QoS Setting Mirror SettingMaintenance Settings System SettingDevice Status Trap Setting Set PasswordBackup Setting Reset SettingLogout Technical Specifications GeneralPerformance Certifications CE Certificate