Juniper Networks M40e installation instructions M160 FPCs Description, Fpc

Page 7

FPC Description

M160 FPCs Description

In an M160 router, up to eight FPCs install vertically into the midplane from the front of the chassis. Each FPC is referenced by the number of the slot in which it is installed. The slot numbers range from FPC0 through FPC7, from left to right in the chassis.

The M160 router supports the two types of FPC shown in Figure 5:

!FPC1—Accommodates up to four lower-speed PICs such as single-port OC-12 and Gigabit Ethernet interfaces. The offline button for each PIC is on the FPC card carrier.

!FPC2—Accommodates up to four higher-speed PICs, such as OC-48, and Tunnel interfaces. The offline button for each PIC is on the PIC faceplate.

Figure 5: FPC1 and FPC2 for the M160 Router

FPC 1

FPC 2

Ejector lever

Ejector lever

Offline buttons

Offline buttons

(on FPC)

(on PICs)

1187

Ejector lever

Ejector lever

Any combination of the two FPC types can be installed in the M160 router. The installation and removal of the two FPC types is identical, so the instructions in this document refer to both types simply as “FPC”.

FPC Installation Instructions

7

 

Image 7
Contents FPC Installation Instructions FPC Description M20 FPC Description M20 Router with Four FPCs Installed M40 FPC Description M40 Router with FPC Installed in Slot FPC7M40e FPC1 M40e FPC2 M40e FPCs DescriptionM40e Router with an M40e-FPC1 Installed in Slot FPC0 FPC M160 FPCs DescriptionTools and Parts Required M160 Router with an FPC1 Installed in Slot FPC0Remove an FPC from an M20 Router Remove an FPC from an M20 Router Install an FPC in an M20 RouterReplace an FPC in an M20 Router Remove an FPC from an M40 Router Replace an FPC in an M40 RouterReplace an FPC in an M40 Router Remove an FPC from an M40 Router Install an FPC in an M40 RouterInstall an FPC in an M40 Router Remove an FPC from an M40e or M160 Router Replace an FPC in an M40e or M160 RouterReplace an FPC in an M40e or M160 Router Remove an FPC from an M40e or M160 Router Install an FPC in an M40e or M160 RouterReplace an FPC in an M40e or M160 Router Levers Replace a PIC in an M40e-FPCRemove a PIC from an M40e-FPC Install a PIC in an M40e-FPCPIC Software Configuration PIC Software Configuration