| MULTIGATE PRO XR4400 | |
|
|
|
7. SPECIFICATIONS |
|
|
AUDIO INPUT |
|
|
Connectors | XLR and 1/4" jack |
|
Type | RF filtered, | |
Impedance | 50 kOhm balanced, 25 kOhm unbalanced | |
Max. Input Level | +21 dBu balanced and unbalanced | |
CMRR | typ. 40 dB, >55 dB @ 1 kHz |
|
AUDIO OUTPUT |
|
|
Connectors | XLR and 1/4" jack |
|
Type | Electronically | |
Impedance | 60 Ohms balanced, 30 Ohm unbalanced | |
Max. Output Level | +21 dBu, +20 dBm balanced and unbalanced | |
SYSTEM SPECIFICATIONS |
|
|
Frequency Response | 18 Hz to 30 kHz, +/- 3 dB |
|
Noise | >95 dBu, unweighted, 22 Hz to 22 kHz | |
THD | 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1 | |
IMD | 0.01 % typ. SMPTE |
|
Crosstalk |
| |
GATESECTION |
|
|
Type | UTR (Ultra Transient Response) gate | |
Threshold | variable (BYPASS to +10 dBu) | |
Attack | program dependent |
|
Hold | variable (0 to 4 sec) |
|
Release | variable (50 ms to 4 sec) |
|
Range | variable (0 to |
|
EXPANDER SECTION |
|
|
Type | IRC (Interactive Ratio Control) expander | |
Attack | program dependent |
|
Ratio | variable (1:1 to 1:4) |
|
|
| |
Frequency | variable (100 Hz to 10 kHz) |
|
BW (Bandwidth) | variable (2.3 to 0.7 oct.) |
|
FUNCTION SWITCHES |
|
|
Monitor | monitors the | |
Filter | activates the | |
Mode | gate/expander switch |
|
Couple | activates the FlexLink function | |
INDICATORS |
|
|
“+” indicator | signal is below threshold |
|
“Hold” indicator | signal reaches the threshold | |
signal is above threshold |
| |
Gain Reduction | ||
LED indicator for each function switch |
| |
POWER SUPPLY |
|
|
Mains Voltages | USA/Canada | 120 V ~, 60 Hz |
| U.K./Australia | 240 V ~, 50 Hz |
| Europe | 230 V ~, 50 Hz |
| General Export Model | 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz |
Power Consumption | max. 20 Watts |
|
Fuse | 100 - 120 V ~: T 630 mA H |
|
| 200 - 240 V ~: T 315 mA H |
|
Mains Connection | Standard IEC receptacle |
|
PHYSICAL |
|
|
Dimension | 1 ¾" (44.5 mm) * 19" (482.6 mm) * 8 ½" (217 mm) | |
Net Weight | approx. 2.5 kg |
|
Shipping Weight | approx. 3.5 kg |
|
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown.
7. SPECIFICATIONS | 21 |