Zoom 4412A/TF manual Re-enter the key in the Confirm Network Key text box

6 In the Preconfigured key [WEP] area, do the following:

aIn the Format for entering key drop-down list, select

•ASCII characters if your network uses all Zoom wireless products

•Hexadecimal digits if an access point, router, or some adapters are not Zoom products

bIn the Key Length drop-down list, select 128 bits or 64 bits.

Note: 128-bit WEP provides more security than 64-bit, but 128-bit could diminish network performance.

cIn the Key Index drop-down list, if you are using a 64-bit key, select which of four keys – 1, 2, 3, or 4 – will be used to encrypt the data. The key you select must be the same one that is selected on the access point. We recommend that you use Key 1.

128-bit WEP uses just a single key.

dIn the Network Key text box, enter a key using the table below as a guide.

The key must be the same for all the devices on your network.

If you selected key	Enter exactly…
type…
Hexadecimal digits	26 characters A–F, a–f and 0–9. For
– 128 bits	example,
	00112233445566778899AABBCC.
Hexadecimal digits	10 characters. The characters can
– 64 bits	be A-F, a-f, and 0-9. For example,
	11AA22BB33.
ASCII – 128-bits	13 characters. The characters can
	be any upper- or lower-case letters
	and numbers. For example:
	MyKey12345678.
ASCII – 64 bits	5 characters. The characters can be
	any upper- or lower-case letters and
	numbers. For example, MyKey.

7 Re-enter the key in the Confirm Network Key text box.

Chapter 2: Setting Security 19