B&B Electronics 232PCI2B, 232PCI2A Install the PCI/USB COM Port Utilities, Using PnP COM Rename

Page 37

Install the PCI/USB COM Port Utilities

(1) To use the PnP COM Rename utility, insert the PCI/USB COM Port Utility Disk and run Setup.exe. This will install COMTest and PnP COM Rename under Programs, B&B Electronics.

(2) The Rename utility will not be installed if you are running Windows 2000 or NT.

Using PnP COM Rename

(1) Shut down all programs that are accessing any Com ports.

(2) Start the PnP COM Rename Utility from the Programs menu under B&B Electronics.

(3) Read the Cautionary Warnings, it is possible to rename a PCI or USB serial port to a number already in use which will cause problems. If any problems occur after renaming, you may need to re-start the system and rerun the Rename utility to correct the situation or remove the serial card in the Device Manager. Then Refresh the Device Manager to detect the card and re-install the drivers. Determine which renamed COM port caused the problem, and do not use that name for a renamed port.

(4) Accept the conditions of use by clicking Yes or click No to exit.

(5) Select the currently named COM port number you want to change in the left window, then the new number in the right window. Then click Finish. Repeat for other ports as needed.

D-2

Appendix D

Documentation Number 232PCIXX4502 Manual

B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Page 36 Page 38
Image 37
Page 36 Page 38
Contents 232PCI1A 232PCI1B 232PCI2A 232PCI2B Single and Dual Port PCI Bus CE RS-232 Serial CardPage Table of Contents Introduction FeaturesDescription 232PCI1x 232PCI2x SpecificationsAccessories Use ESD precautions for safe handling Setup InspectionSilk Screen Plot of 232PCIxx PCB 4X Baud Rate Option Installing the CardRS-232 Pinouts Name Description Direction PinoutsPin Windows 95 and Windows Windows InstallationDocumentation Number 232PCIXX4502 Manual Select Floppy disk drives, Specify A\ Documentation Number 232PCIXX4502 Manual Click Next. W95 Skip to step Click Next. W95 Driver name not shown Documentation Number 232PCIXX4502 Manual Removal of Card And Drivers Next Windows 2000 Professional Documentation Number 232PCIXX4502 Manual Documentation Number 232PCIXX4502 Manual Wait for the process to complete Removal of Card & Drivers Windows NT Click the Install button, then click Next Insert the driver disk into drive a Open the Control Panel, select Ports Next Next Removal of Card and Driver European Office USA OfficePort 1 I/O Schematic Appendix a 232PCIXX I/O SchematicRS-232 Pinouts DTE Appendix B RS-232 PinoutsDescription Direction DB9 Null DB25 Null PinAppendix C Troubleshooting with COMTest Appendix D Renaming COM Ports Win 95/98/ME Renaming PCI COM Ports Using the PnP COM Rename UtilityUsing PnP COM Rename Install the PCI/USB COM Port UtilitiesDocumentation Number 232PCIXX4502 Manual Appendix D Appendix E Declaration of Conformity
Top Page Image Contents