Optimus SYSTEM 730 owner manual Reviewing a Programmed Sequence

13-1277.fm Page 22 Wednesday, July 14, 1999 4:11 PM

5.Press PLAY , or CD on the remote control, to play the pro- grammed sequence. , P-01, and the first programmed CD and track number appear. Then the CD’s elapsed play time appears, and the first track begins to play.

Note: To briefly	stop pro-
grammed play, press PAUSE
on the main system.		appears

on the display. To resume pro-

grammed play, press PLAY			,
or CD		on the remote control.
	disappears.

6.Programmed play automatically stops at the end of the last pro- grammed track. To stop the CD changer at any time during pro- grammed play, press and

release STOP , or press CD

on the remote control. and the CD’s elapsed play time disappear from the display.

22

Notes:

•Press PLAY , or CD on the remote control, to play the pro- grammed sequence again.

•To replace a programmed track, press RECALL on the remote control until the memory number of the track you want to replace appears on the display. Then repeat Steps 1-3 to store a new track.

•To resume regular or random play after storing a programmed sequence, you must first erase the programmed sequence (see “Erasing a Programmed Se- quence”).

Reviewing a Programmed Sequence

To review a programmed sequence, while play is stopped, repeatedly press RECALL on the remote control. As you press it, the CD, track num- ber, and memory position of each stored track appears.