Avaya X330W-2DS1 quick start Configure the Module, Establishing a Serial Connection

Page 6

Configure the Module

Before you can set up the X330WAN module you must power on and set up the Avaya P330 stack as described in the Avaya P330 User’s Guide.

Before using the X330WAN module you must assign an IP address via the Command Line Interface (CLI) or via a Telnet session to the switch where the X330 is inserted.

The following steps describe how to configure the X330WAN module using the Avaya CLI.

Establishing a Serial Connection

Perform the following steps to connect a terminal to the Console port of the X330WAN for configuration of WAN parameters using the CLI:

1. Use the supplied serial cable to attach the RJ-45 console connector to the Console port. Connect the DB-9 connector to the serial (COM) port on your PC/terminal.

2. Use the following serial port settings on the PC: 9600 baud, 8 bits, 1 stop bit and no parity. If you connected a PC, run a VT-100 emulation session. (You can use the Windows® HyperTerminal.)

The terminal connected to the serial port must be configured with the same settings; this setting will work with any PC COM port over a DB9 to RJ45 connector.

3. Press Enter.

4. When prompted for a Login Name, enter the default name root. 5. When promoted for a password, enter the password root.

Establishing a Modem Connection

 

 

A PPP connection with a modem can be established only after the X330WAN is config-

 

 

ured with an IP address and net-mask. Also, the parameters used in the X330WAN

 

 

must be compatible with the remote peer parameters.

 

 

Commands are shown as follows: ip address; parameters which you need to enter

 

 

5

 

are shown in <> as follows: <net-mask>

 

All CLI commands mentioned in this section are described in the Avaya P330 Reference

 

 

 

 

Guide.

 

To configure a modem interface:

 

1.

Connect a terminal to the Console port of the X330WAN as described in “Connecting the

 

 

Console Port”.

2.

When prompted for a Login Name, enter the default name root and press Enter.

3.

When prompted for a password, enter the password root and press Enter. You are now

 

 

in Supervisor mode.

4.

At the prompt, type: interface Console and press Enter.

5.

Use the ip address <ip_addr><net-mask>command entering an IP address and net-

 

 

mask to be used by the remote peer to connect via its console interface to the X330WAN.

Image 6
Contents Quick Start Guide Important Safety Information Equipment CD ContentsUnpack the Module DocumentationInsert the Module Connecting the Console Port Connecting the E1/T1 PortsConnecting the Ethernet Port Connect the PortsConfigure the Module Establishing a Serial ConnectionEstablishing a Modem Connection Type async mode interactive Configuring Loopback Interfaces Configuring Fast Ethernet InterfacesConfiguring E1/T1 Interfaces Changing the Primary Management Interface pmi Establishing a Telnet ConnectionX330WAN Default Settings Function Default SettingRun the Web-Based Manager optional System RequirementsRunning the Embedded Manager Page Documentation and Online Help Page Contact Information From the United StatesFrom outside the United States

X330W-2DS1 specifications

The Avaya X330W-2DS1 is a powerful wireless access point designed to meet the growing demands of modern network environments. With its robust technology and versatile capabilities, it stands out in the competitive landscape of enterprise networking solutions.

One of the key features of the Avaya X330W-2DS1 is its dual-band functionality. Operating on both the 2.4 GHz and 5 GHz frequency bands, it allows for flexible deployment options and better overall performance. This dual-band capability significantly reduces network congestion and improves user experience by allowing devices to connect on the less crowded 5 GHz band, thereby enhancing the speed and reliability of wireless connectivity.

In terms of wireless technology, the Avaya X330W-2DS1 supports the latest Wi-Fi 6 standards. This advanced technology provides increased capacity, improved efficiency, and lower latency, making it perfect for high-density environments such as offices, universities, and public spaces. With Wi-Fi 6, the access point can handle more simultaneous users and devices, which is crucial in today’s world where the number of connected devices continues to rise.

The Avaya X330W-2DS1 also features advanced security protocols to safeguard network communications. It supports WPA3 encryption, which provides enhanced security over previous standards. This is particularly important for enterprises that handle sensitive data and require robust security measures to prevent unauthorized access.

Another notable characteristic is the Intelligent Traffic Management feature. This allows for optimal allocation of bandwidth to different users and applications, prioritizing critical business functions while ensuring fair access for all connected devices. The access point can intelligently identify the types of traffic flowing through it, helping to improve the overall user experience.

Additionally, the device offers easy deployment and management through Avaya’s cloud-based management system. This allows IT administrators to monitor the performance of the access point remotely, simplifying troubleshooting and maintenance tasks.

Overall, the Avaya X330W-2DS1 combines advanced wireless technologies, exceptional performance, and robust security features, making it a valuable asset for any organization looking to enhance its network infrastructure. Its scalability and ease of management further solidify its position as a top choice for businesses aiming to stay ahead in a rapidly evolving digital landscape.