B&B Electronics manual Installing a 232HSPCC in Windows

Page 8

Installing a 232HSPCC in Windows 9x.

The following procedure is used to configure a 232HSPCC for use with Windows 9x:

1.Insert the 232HSPCC into any available PC Card socket.

2.The first time a new PC Card type is installed, either the New Hardware Found window or the Update Device Driver Wizard window is displayed. After the initial installation, Windows 9x will automatically detect and configure the card. If neither window is displayed, skip to the section "232HSPCC Resource Settings".

3.If your version of Windows displays the New Hardware Found window, select the Driver from Disk option button and click OK to continue. An Install From Disk dialog box should open. Insert the 232HSPCC disk, select the correct drive letter (generally A:), and click the OK button. Windows 9x automatically browses the root directory for an INF file that defines configurations for the new hardware.

4.If your version of Windows displays the Update Device Driver Wizard window, insert the 232HSPCC disk into the A: or B: drive and click Next. Windows 9x automatically browses the root directory of A: and B: for an INF file that defines configurations for the new hardware. Windows 9x will report that is has found the driver for the device. Click Finish to complete the installation.

5.During the installation, it may be necessary to supply the Windows 9x CD or installation disks. Two drivers are required for serial devices, SERIALUI.DLL and SERIAL.VXD. In many cases, these files are already installed on the host computer. If this is the case, click “OK” when prompted for disks and select the “skip” option. The version of these files that exists in the Windows system directory will be used.

6.Windows 9x socket services should indicate the 232HSPCC PCMCIA card configuration by a low-high tone beep.

The 232HSPCC should now be configured. Windows 9x automatically assigns the 232HSPCC to the first available COM port number. For detailed configuration information read the "232HSPCC Resource Settings" section. In the future, Windows 9x will automatically recognize and configure the 232HSPCC in this default configuration. The 232HSPCC will default to low speed mode when installed. To set the card to high speed click on the B&B HIGH SPEED RS-232 PC CARD under the PORTS in the DEVICE MANAGER. Click on the HIGH-SPEED tab, then select 1x or 4x mode, and click on apply.

6

PCMCIA Card

Documentation Number 232HSPCC1199 Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Not Recommended for New Installations Table of Contents Installation DOS and Windows 3.x InstallationInstalling the Serial Card IntroductionConfiguring the Serial Card Software Setup Card and Socket Service UsersPoint Enabler Users Using the Point Enabler ProgramPcmcia Card Windows 9x Installation Installing a 232HSPCC in Windows 232HSPCC Resource Settings in Windows Card Specifications Appendix aCable Pinout Diagrams Pin D Connector Pin Assignments Pin # Signal NameNull Modem Cable Pinout Com Port Information COM Port IoBaseWarranty FCC Part 15 Compliance Appendix B Declaration of Conformity Declaration of Conformity

232HSPCC specifications

B&B Electronics 232HSPCC is a highly regarded serial communication device known for its efficiency and versatility. This product is especially recognized for facilitating reliable data transfer in various industrial applications, making it a favorite among engineers and technicians.

At the heart of the 232HSPCC is its ability to convert RS-232 signals to RS-422/485. This transition is essential for extending communication distances, allowing for transmission over significantly longer cables without degradation of the signal. While standard RS-232 communication is typically limited to 50 feet, the 232HSPCC reduces susceptibility to noise and enables distances of up to 4000 feet, making it ideal for factory automation, remote monitoring, and SCADA systems.

One of the standout features of the 232HSPCC is its robust design. This device is built to withstand harsh environmental conditions, ensuring reliable performance in areas with high levels of electromagnetic interference. It operates efficiently over a wide temperature range, accommodating diverse application settings while maintaining stability.

The 232HSPCC supports data rates of up to 115.2 kbps, ensuring high-speed communication that meets the demands of modern industrial networks. Its compatibility with various protocols adds to its flexibility, allowing it to be integrated seamlessly with existing systems. With its simple dip-switch configuration and automatic RTS/CTS handshaking, setup is straightforward, reducing downtime during implementation.

Additionally, this device features built-in isolation, which protects connected devices from voltage spikes and surges, thereby enhancing reliability and longevity. The 232HSPCC is also equipped with diagnostic LED indicators that provide real-time feedback on the status of communication and power, facilitating easier troubleshooting.

The compact design of the 232HSPCC allows for easy installation in confined spaces, while its sturdy housing provides durability and protection. This makes it suitable for both panel mounting and standalone applications.

In summary, B&B Electronics 232HSPCC is a powerful, versatile, and reliable solution for serial communication needs. Its ability to convert RS-232 to RS-422/485, combined with robust environmental resilience, high data rates, and built-in isolation, makes it an invaluable tool for professionals seeking efficiency and reliability in their operations.
Top Page Image Contents