6 Click the Configuration tab, then enter the VPI and VCI numbers in the corresponding ATM Channel VPI and ATM Channel VPI boxes, select the Encapsulation Type from the
Note:
If you do not know your ADSL service provider’s settings, refer to the tables beginning on page 27 or contact your service provider.
7 What happens next depends on the type of Encapsulation you selected in the step above.
!If you selected Bridged or Routed: No additional configuration is usually required. Go to Step 8.
!If you selected PPP: From the Apple menu, select Control Panel and then Remote Access. Then enter the Username and Password your ADSL service provider gave you, and click Connect.
Note:
If you change your Encapsulation settings in the ADI monitor from this point on, you must unplug your modem’s USB cable and then plug it back in after you restart your computer.
8 Verify that your Internet connection is working. Open your Web browser (i.e., Internet Explorer or Netscape Navigator) and try to connect to a familiar Web address.
If you connect successfully, your installation is complete and you are ready to browse the Web!
If you did not connect, see Connection Troubleshooting Tips on page 20.
19