Thank you for choosing the ZNYX NetBlaster 470 Series CompactPCI (cPCI) Fast Ethernet Adapter. The NetBlaster 470 series is a fully featured product family of carrier Class CompactPCI Fast Ethernet adapters for high availability applications requiring
•Four or Eight channel configurations, 6U
•Rear I/O via passive 6U x 80mm rear transition module
•Hot swap capability
•
•Designed for NEBS Level 3 systems
Your adapter is designed to provide a lifetime of superior service in your system with cPCI slots.
NetBlaster ZX470 Series Fast Ethernet Adapter Models
Model | Fast Ethernet Channels | cPCI Slot |
|
|
|
ZX474 | Four 10/100 Mbps | 6U |
|
|
|
ZX478 | Eight 10/100 Mbps | 6U |
|
|
|
ZX404H | 6U | |
| connector |
|
ZX404HAB | 6U | |
| connector |
|
ZX408H | 6U | |
| connector |
|
ZX408HAB | 6U | |
| connector |
|
ZX404A | 6U | |
| connector (MDI) |
|
ZX404AAB | 6U | |
| connector (MDI) with |
|
ZX408A | 6U | |
| connector (MDI) |
|
ZX408AAB | 6U | |
| connector (MDI) with |
|
Documentation and Software
Documentation and software for the NetBlaster adapter is distributed electronically. You can retrieve most recent drivers and documentation and drivers from the ZNYX web site, www.znyx.com in the driver download section. Please contact ZNYX Customer Support at (800)
Installation Procedure
There are two basic steps you need to follow to operate the NetBlaster adapter.
1.Install the hardware (NetBlaster adapter and rear transition card).
2.Install the driver.
ZNYX NetBlaster 470 Series cPCI Fast Ethernet Adapter | User’s Guide | Page 3 |