Behringer manual Control UCA202 System Requirements, Hardware connection

Page 11

U-CONTROL UCA202

2. SYSTEM REQUIREMENTS

The UCA202 is PC and Mac-compatible. Therefore, no installation procedure or drivers are required for the correct functioning of the UCA202.

To work with the UCA202, your computer must fulfill the following ninimum requirements:

PC

MAC®

Intel® or AMD® CPU, 400 MHz or higher

G3, 300 MHz or higher

minimum 128 MB RAM

minimum 128 MB RAM

USB 1.1 interface

USB 1.1 interface

Windows® XP, 2000

Mac OS® 9.0.4 or higher, 10.X or higher

2.1 Hardware connection

Use the USB connecting cable supplied with the UCA202 to connect the unit to your computer. The USB connection also supplies the UCA202 with current. You can connect a variety of devices and equipment to the inputs and outputs.

2. SYSTEM REQUIREMENTS

11

Image 11
Contents Control UCA202 Control UCA202 Important Safety Instructions Control UCA202 Detailed Safety InstructionsControl Dear Customer Control UCA202 ForewordControl UCA202 UCA202 ControlControl UCA202 Introduction Shipment Before you startedOnline registration Hardware connection Control UCA202 System RequirementsFront panel Control UCA202 Operating Elements and ConnectionsBack of the UCA202 Rear panelApplication example Control UCA202 Working with the UCA202Control UCA202 Control UCA202 Audio Connections WiringAdapter cable with 1/4 jack Headphones connectionPhones OUT SpecificationsDigital Processing § 1 Other Warranty Rights and National LAW Control UCA202 Warranty§ 5 Warranty Regulations § 6 Warranty Transferability