Avaya P333R-LB manual Maintenance, Adding/Replacing an Expansion Sub-module

Page 211

Chapter 17

Maintenance

Introduction

This section provides basic maintenance information for the Avaya P330 switch and its components. For issues that are not covered in this chapter or in "Troubleshooting the Installation," please contact your Avaya representative.

Caution: Please refer to "Before You Install the P330" before undertaking any of the procedures detailed in this section.

Adding/Replacing an Expansion Sub-module

Caution: The expansion sub-modules contain components sensitive to electrostatic discharge. Do not touch the circuit board unless instructed to do so.

Adding an Expansion Sub-module to Avaya P330

1Remove the blanking plate or other sub-module (if installed).

2Insert the sub-module gently into the slot, ensuring that the Printed Circuit Board (PCB) is aligned with the guide rails.

The PCB not the metal base plate fits into the guide rail.

3Firmly press the sub-module until it is completely inserted into the Avaya P330.

4Gently tighten the two screws on the front panel of the expansion sub-module by turning them.

Note: The Avaya P330 switch must not be operated with the expansion slot open; the expansion sub-module slot should be covered with the supplied blanking plate if necessary.

Replacing an Existing Expansion Sub-module

If an expansion sub-module is removed from the stack with the power supply on, all configuration definitions on expansion sub-modules are lost. Both procedures for replacing an expansion sub-module—with saving and without saving configuration definitions —follow:

Avaya P333R-LB User’s Guide

69

Page 210 Page 212
Image 211
Page 210 Page 212
Contents Avaya P333R-LB Page Table of Contents Section Installing the P330 Section Configuration of the P330 LAG Bootp Vrrp Avaya User’s Guide Vii Section Troubleshooting and Maintaining the P330 CLI Conventions Before you Install the P333R-LBSafety Information FCC Notice Conventions Used in the DocumentationAvaya P333R-LB User’s Guide Avaya P333R-LB Page Avaya P333R-LB Overview Avaya P330 Family FeaturesIntroduction Avaya P330 Device Manager Embedded Web Avaya P330 Command Line Interface CLIAvaya Multi-Service Network Manager Msnm Avaya P330 Network ManagementSmon Fans, Power Supply and Bups MonitoringAvaya P333R-LB Overview Avaya P333R-LB User’s Guide Avaya P330 Standards Supported Standards and CompatibilityIetf Layer Ietf Network Monitoring Avaya P333R-LB Switch SpecificationsAgency Approvals SafetySafety AC Version Safety DC VersionBasic Mtbf Stacking ModuleExpansion Modules InterfacesUsage Restriction Laser ClassificationLaser Data Ethernet/Fast Ethernet Expansion Module Fast Ethernet Fiber Expansion ModuleGbic Expansion Module Safety InformationAvaya Approved Gbic Transceivers SpecificationsX330GT2 Gigabit Ethernet Expansion Module Agency ApprovalATM Expansion Modules WAN Expansion Modules Multi-Mode Module LED WarningChapter Installing the P330 Page Required Tools InstallationSite Preparation Power Requirements DC Avaya P330 Rack Mounting Rack Mounting OptionalInstalling the X330STK Stacking Sub-module in the P330 Stacking Switches OptionalConnecting Stacking Sub-modules Incorrect Stack Connection Avaya P330 Stack Connections Installing the Expansion Sub-module into the Avaya P330 Installing Expansion Sub-modulesPrerequisites Making Connections to Network EquipmentPort Types 1000BASE-SX Chapter Installation Avaya P333R-LB User’s Guide Powering On Avaya P330 Module AC Powering Up the Avaya P330Powering On Avaya P330 Module DC Post-Installation Avaya P333R-LB Front Panel Avaya P333R-LB Front and Back PanelsPWR OFF Bups Input Connector Sticker Bups Input ConnectorConnecting a Terminal to the Avaya P330 Serial port Configuring the Terminal Serial Port ParametersEstablishing a Serial Connection Assigning P330’s IP Stack Address P330 SessionsFor example telnet Establishing a Telnet ConnectionEstablishing a Modem PPP Connection with the P330 Connecting a Modem to the Console PortOverview Security Levels CLI ArchitectureDefining new local users Entering the Supervisor LevelEntering the CLI Exiting the Supervisor LevelIntroduction to Radius User Authentication Radius Commands Illustrates the Radius authentication procedureUser Authentication Allowed Managers Allowed Manager CLI CommandsUser Authentication Avaya P333R-LB User’s Guide Configuration of the P330 Page Basic Switch Configuration Identifying the system System Parameter ConfigurationOperating parameters UTC Network Time Acquiring Protocols Parameter ConfigurationBasic Switch Configuration Avaya P333R-LB User’s Guide Configuring the Switch Default Settings of the P330Avaya P330 Default Settings 10/100Base-TX ports 100Base-F ports Base-X ports Chapter Default Settings of the P330 Default Settings of the P330 Avaya P333R-LB User’s Guide Overview Avaya P330 Layer 2 FeaturesEthernet Configuring Ethernet Parameters Priority Flow ControlMAC Address CAM Table Ethernet Configuration CLI CommandsEthernet Implementation in the Avaya P333R-LB Vlan Overview Vlan ConfigurationMulti Vlan Binding Vlan TaggingIngress Vlan Security Vlan CLI CommandsVlan CLI Commands Vlan Implementation in the Avaya P333R-LB How Port Based Authentication Works Port Based Network Access Control PbnacPbnac Implementation in the P330 Family Pbnac CLI Commands Configuring the P330 for PbnacChapter Avaya P330 Layer 2 Features Avaya P330 Layer 2 Features Spanning Tree Protocol Spanning Tree ProtocolSpanning Tree per Port About the 802.1w Standard Rapid Spanning Tree Protocol RstpPort Roles Spanning Tree Implementation in the P330 Family Spanning Tree Protocol CLI Commandss Spanning Tree Protocol CLI CommandsChapter Avaya P330 Layer 2 Features MAC Security MAC Security CLI CommandsMAC Security Implementation in P330 Avaya P330 Layer 2 Features LAG Overview LAG CLI CommandsLAG Implementation in the Avaya P330 Family of Products Port Redundancy Operation Port RedundancyIntermodule Port Redundancy Port Redundancy CLI CommandsAvaya P330 Layer 2 Features IP Multicast Filtering IP Multicast Implementation in the Avaya P333R-LB IP Multicast CLI CommandsStack Health Stack Health CLI CommandsImplementation of Stack Health in the P330 Family Port Classification Port Classification CLI CommandsStack Redundancy Avaya P330 Layer 2 Features Avaya P333R-LB User’s Guide What is Routing? Avaya P330 Layer 3 FeaturesRouting Forwarding Routing ConfigurationMultinetting Multiple Subnets per Vlan IP Configuration CLI Commands IP ConfigurationAssigning Initial Router Parameters Routerconfigure# interface interface-name RIP Overview RIP Routing Interchange Protocol ConfigurationRIP2 RIP CLI CommandsAvaya P330 Layer 3 Features Ospf Overview Ospf Open Shortest Path First ConfigurationOspf CLI Commands Static Routing Configuration CLI Commands Static Routing ConfigurationStatic Routing Overview RIP Route PreferencesRoute Redistribution Route Redistribution CommandsARP Overview ARP Address Resolution Protocol Table ConfigurationARP Table ARP CLI CommandsDHCP/BOOTP Relay BOOTP/DHCP OverviewBOOTP/DHCP CLI Commands NetBIOS Overview NetBIOS Re-broadcast ConfigurationNetBIOS Re-broadcast Configuration CLI Commands Policy Configuration Overview Policy ConfigurationPolicy and Load Balancing Default List BehaviorPolicy Configuration CLI Commands Enforcement110 Avaya P333R-LB User’s Guide Avaya P330 Policy Policy Configuration ExampleIP Fragmentation and Reassembly Overview IP Fragmentation and ReassemblyIP Fragmentation/Reassembly CLI Commands Layer 3 Configuration File Avaya P330 Layer 3 Features 114 Avaya P333R-LB User’s Guide Vrrp Layer 3 RedundancyVrrp Commands Vrrp CommandsAvaya P333R-LB User’s Guide 117 WAN Configuration ExampleChapter Layer 3 Redundancy 120 Avaya P333R-LB User’s Guide Srrp Srrp CommandsRSG Backup Configuration Example Real Server Group BackupAdditional Redundancy Schemes Avaya P333R-LB User’s Guide 123 124 Avaya P333R-LB User’s Guide Real Server Backup Configuration Example Real Server Backup126 Avaya P333R-LB User’s Guide Avaya P333R-LB User’s Guide 127 Layer 3 Redundancy 128 Avaya P333R-LB User’s Guide How It Works Load Balancing in the P333R-LBFirewall Load Balancing BenefitsImplementation Transparent Routing Firewall Load BalancingLAN Configuring Firewall Load Balancing in the P333R-LBLoad Balancing in the P333R-LB Load Balancing in the P333R-LB Load Balancing in the P333R-LB Load Balancing in the P333R-LB Load Balancing in the P333R-LB Firewall Demilitarized Zone DMZ Configuration ExampleLoad Balancing in the P333R-LB Chapter Load Balancing in the P333R-LB Load Balancing in the P333R-LB Hash Load Balancing Metrics for Transparent Routing FwlbMinMiss Hash Hash Metric Loss of PersistencySelecting a Load Balancing Metric Weighted FirewallsHealth Check Non-Transparent Routing Firewall Load Balancing PersistencyImplementation Internet NAT Configuration ExampleStatic NAT Configuration Example Load Balancing Metrics for Non-Transparent Routing Fwlb Non-Transparent Routing Fwlb Sample Static NAT ConfigurationBridging Firewall Load Balancing Following figure illustrates Bridging Fwlb Configuration ExampleLoad Balancing in the P333R-LB Load Balancing in the P333R-LB Load Balancing Metrics for Bridging Fwlb Firewall Load Balancing Management Security Benefits Server Load BalancingHalf NAT Load Balancing Load Balancing in the P333R-LB Half NAT Based Configuration Configuring Server Load Balancing in the P333R-LBP333R-LB-1config-if2#ip address 10.1.1.10 255.255.255.0 Done Full NAT Load Balancing 10.1.1.3Load Balancing in the P333R-LB 255.255.255.0 Full NAT Based ConfigurationDone P333R-LB-1super-ifclient#exit Direct Server Return DSR Triangulation Redirection Low10 illustrates an SLB Triangulation configuration DSR Triangulation Configuration ExampleLoad Balancing in the P333R-LB Combining Two Cache Applications on the Same Real Caches DNS ConfigurationLoad Balancing Metrics Round Robin 12 Hash Metric Loss of Persistency Health Check Weighted Real ServersClient Persistency Port Re-mapping Selecting a Load Balancing Metric and Persistency OptionLoad Balancing in the P333R-LB Application Redirection Load Balancing in the P333R-LB Application Redirection Configuration ExamplesP333R-LB-1configure#ip default-gateway Load Balancing in the P333R-LB 15 Two Cache Applications on the Same Real Caches Combining Two Cache Applications on the Same Real CachesLoad Balancing in the P333R-LB Load Balancing in the P333R-LB Load Balancing Metrics 16 Hash Metric Loss of Persistency Weighted Real Servers Load Balancing in the P333R-LB Client Persistency Policy-Based Routing Source-Based Routing Load Balancing in the P333R-LB Avaya P333R-LB User’s Guide System Requirements Embedded Web ManagerEmbedded Web Manager/Browser Compatability Running the Embedded Web ManagerWelcome Web-based Manager Install from the Avaya Site Installing the Java Plug-inInstall from your Local Web Site Embedded Web Manager P330 Page Troubleshooting the Installation Troubleshooting the InstallationTroubleshooting the Installation Replacing an Existing Expansion Sub-module MaintenanceAdding/Replacing an Expansion Sub-module Adding an Expansion Sub-module to Avaya P330Without Saving Configuration Definitions Saving Configuration DefinitionsReplacing the Stacking Sub-module Software Download Updating the SoftwareObtain Software Online Downloading Software Download New Version without Overwriting Existing Version United States How to Contact UsAP Asia Pacific Region Cala Caribbean and Latin America Region Avaya P333R-LB User’s Guide
Related manuals
Manual 10 pages 7.24 Kb

P333R-LB specifications

The Avaya P333R-LB is a robust and versatile switch that is part of Avaya's portfolio aimed at enterprise networking solutions. This switch is designed to enhance the performance and scalability of network infrastructure while ensuring high availability and reliability.

One of the main features of the P333R-LB is its Layer 3 switching capability, which allows for efficient routing within an organization's network. This capability is particularly beneficial for organizations with multiple VLANs, as it simplifies the routing process and ensures that data packets are transmitted in the most efficient manner possible.

The P333R-LB is equipped with advanced Quality of Service (QoS) features to prioritize traffic based on the type of application being used. This ensures that critical applications, such as VoIP and video conferencing, receive the necessary bandwidth and low latency required for optimal performance. Additionally, it supports both IPv4 and IPv6 protocols, making it adaptable to a variety of networking environments.

Another important feature of the Avaya P333R-LB is its stackable design. This allows multiple switches to be interconnected, creating a single logical unit. This stacking capability not only simplifies management but also increases overall network capacity and redundancy. In case of a hardware failure, the stack can continue operating without interruption, maintaining network integrity and service continuity.

The switch also integrates advanced security features, including support for MAC filtering, access control lists, and port security. These features help to safeguard network resources from unauthorized access and potential threats. Moreover, the P333R-LB supports 802.1X port-based authentication, which adds an additional layer of security during user access to the network.

The Avaya P333R-LB comes with multiple Gigabit Ethernet ports, allowing for high-speed connectivity to devices such as servers, workstations, and IP phones. This ensures that all devices on the network can communicate effectively, supporting the demands of modern enterprise environments.

For management and monitoring, the P333R-LB offers a user-friendly web interface along with SNMP support, enabling network administrators to easily configure settings and monitor network performance. This simplicity in management is crucial for IT teams that need to ensure optimal network performance while minimizing downtime.

In summary, the Avaya P333R-LB is a feature-rich, scalable, and reliable switch that meets the needs of demanding enterprise networks. With its advanced technologies, QoS support, stackable design, robust security features, and high-speed connectivity options, the P333R-LB is positioned to support a wide range of applications and enhance overall network performance.
Top Page Image Contents