Avaya P460 manual Establishing a Telnet Connection with the Switch Outband

Page 15

Chapter 2 Establishing Switch Access

In order to...

Use the following command...

 

 

 

 

Send an ICMP echo request packets

ping

to another node on the network.

 

 

 

Note: For more detailed information on the CLI commands, please refer to the Avaya P460 Reference Guide

Establishing a Telnet Connection with the Switch (Outband)

Figure 2.2 M460ML-SPV Supervisor Module Fast Ethernet Console Port

Perform the following steps to establish a Telnet connection to the P460 for configuration:

You need to assign an outband interface IP address using a direct connection to the console serial port before you can establish the Telnet session.

You can configure the Fast Ethernet console port parameters if necessary.

The outband interface should be on a different subnet from the inband interface.

1Connect your station to the Fast Ethernet console port (directly or via the network).

2Verify that you can communicate with the P460 using “ping” to the outband interface IP of the P460. If there is no response using the Ping command, check the IP address and default gateway of both the P460 and the station.

3Start a Telnet session:

—From the Microsoft Windows® taskbar of your PC click Start and then Run or access the command prompt

—Start the Telnet session by typing: telnet <P460_IP_address>

For example: telnet 149.49.35.214

XThe Login Name prompt is displayed

4 Enter the default name root

XThe password prompt is displayed

5Enter the password root in lower case letters. You can now configure the P460.

You can connect the Out-band interface to either of the Supervisor modules.

Avaya P460 Configuration Guide

5

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Avaya P460 Page Contents Table of Contents RIP2 Rmon List of Tables List of Tables Avaya P460 Configuration Guide List of Figures Avaya P460 Switch Front ViewList of Figures Viii Avaya P460 Configuration Guide Introduction Avaya P460 Product OverviewModules PSUs Power Supply UnitsAvaya P460 Main Components Supervisor ModulesEstablishing a Console Connection with the P460 Establishing Switch AccessEstablishing a Telnet Connection with the Switch Inband Inband Interface Connection CLI CommandsFor example telnet M460ML-SPV Supervisor Module Fast Ethernet Console Port Establishing a Telnet Connection with the Switch OutbandOutband Interface Connection CLI Commands Redundant Outband Connections Redundant Outband ConnectionsOverview Sideband PPP Interface CLI CommandsSetting Up Sideband PPP Connection Configuration Set interface ppp enableSet interface ppp ipaddrnet-mask Establishing Switch Access Avaya P460 Configuration Guide M460ML-SPV Supervisor Module Modes Avaya P460 Supervisor Module FeaturesSynchronizing the Supervisor Modules Manually Supervisor SynchronizationP460-1super# sync spv Configuration File SynchronizationAvaya P460 Supervisor Module Features Avaya P460 Layer 2 Features Configuring Ethernet ParametersEthernet MAC Address€ Flow Control€Duplex Mode€ Speed€CAM Table€ Ethernet Configuration CLI CommandsAvaya P460 Layer 2 Features P460-1super#set port duplex 6/40 full Ethernet Configuration ExamplesP460-1super#set port negotiation 6/40 disable P460-1super#set port negotiation 6/40 enableVlan Overview Vlan ConfigurationVlan Tagging Sales Marketing EngineeringBind to All Bind to ConfiguredMulti Vlan Binding Static BindingVlan CLI Commands P460 Vlan TableIngress Vlan Security Avaya P460 Layer 2 Features P460-1super#set port static-vlan 6/40 Vlan Configuration ExampleSpanning Tree Configuration Spanning Tree OverviewSpanning Tree per Port Spanning Tree CLI Commands LAG Configuration Configuring LAGsLAG Overview LAG Redundancy Logical Port NumbersLAG CLI Commands LAG Configuration ExampleP460-1super#set port channel 6/41-47 on p460lag Port Redundancy Overview Port Redundancy ConfigurationSwitchback Switchback ParametersRedundancy CLI Commands P460-1super#set port redundancy-intervals 10 none P460-1super#set port redundancy disableP460-1super#set port redundancy enable P460-1super# set port redundancy 6/40 6/48 on p460redIP Multicast Filtering Configuration IP Multicast CLI Commands Broadcast Storm Control Overview Broadcast Storm ControlP460-1super#set broadcast storm threshold Broadcast Storm Control CLI CommandsBroadcast Storm Control Configuration Examples P460-1super# set broadcast storm enablePriority Queues Priority Configuration CLI Commands Priority ConfigurationWhat is Routing? Avaya P460 Layer 3 FeaturesRouting Routing Configuration ForwardingMultinetting Multiple Subnetworks per Vlan IP Configuration CLI Commands IP ConfigurationP460-1super#set device-mode router Basic Router ConfigurationRouter-1super#set vlan 100 name vlan#100 Display the settingsRouter-1configure#copy running-config startup-config RIP Overview RIP Routing Interchange Protocol ConfigurationRIP CLI Commands Avaya P460 Layer 3 Features Ospf Open Shortest Path First Configuration Ospf CLI CommandsOspf Overview Avaya P460 Layer 3 Features Static Routing Configuration Static Routing Configuration CLI CommandsStatic Routing Overview RIP Route PreferencesRoute Redistribution Route Redistribution CommandsARP Overview ARP Address Resolution Protocol Table ConfigurationARP Table ARP CLI CommandsDHCP/BOOTP Relay BOOTP/DHCP OverviewBOOTP/DHCP CLI Commands NetBIOS Re-broadcast Configuration NetBIOS OverviewNetBIOS Re-broadcast Configuration CLI Commands Vrrp Overview Vrrp Virtual Router Redundancy Protocol ConfigurationCase#1 Vrrp Configuration ExampleCase #2 Vrrp CLI CommandsAvaya P460 Layer 3 Features Policy Configuration Overview Policy ConfigurationAvaya P460 Policy Policy Configuration CLI CommandsP460-1super#ip access-list 100 2 fwd3 tcp any host Policy Configuration ExampleAvaya P460 Layer 3 Features Avaya P460 Configuration Guide Managers and Agents Switch Monitoring FeaturesSnmp Configuration Snmp Configuration OverviewSnmp Communities Snmp Configuration CLI CommandsSwitch Monitoring Features Rmon Overview Rmon CLI commandsSwitch Monitoring Features Smon Overview SmonSmon CLI Commands Log CLI Commands LogsLog Overview Port Mirroring Constraints Port Mirroring ConfigurationPort Mirroring CLI commands Port Mirroring OverviewPort Classification CLI Commands Port ClassificationPort Classification Overview

P460 specifications

The Avaya P460 is a robust and versatile multichannel communications system designed to enhance enterprise communication environments. It is a part of Avaya’s suite of products aimed at delivering seamless interaction across various communication channels, catering to the needs of businesses ranging from small to large enterprises.

One of the standout features of the Avaya P460 is its support for Unified Communications, which allows organizations to integrate voice, video, messaging, and collaboration tools into a unified platform. This integration helps eliminate communication silos and promotes a more collaborative work environment. Users can access multiple communication modes, streamlining interactions and improving productivity across teams.

The P460 is built on Avaya's reliable technology framework, ensuring high availability and disaster recovery capabilities. With features such as automatic failover and redundancy, businesses can rely on the P460 for consistent performance, even during unexpected outages. This reliability is crucial for mission-critical operations where downtime can lead to significant financial losses.

Scalability is another key characteristic of the Avaya P460. It supports a wide range of users and can grow alongside an organization’s needs. Business owners can start with a small deployment and expand it seamlessly as the company scales, making it a cost-effective solution for evolving communication requirements.

Security is paramount in today's digital landscape, and the Avaya P460 comes equipped with advanced security features to protect sensitive communications. Secure encryption protocols ensure that voice and data transmissions remain private and protected from unauthorized access, thus maintaining confidentiality and compliance.

The Avaya P460 also offers powerful analytics and reporting tools, giving organizations insights into their communication patterns. By analyzing call data and usage statistics, businesses can make informed decisions to optimize their operations and improve customer service. This analytical capability is essential for organizations seeking to enhance their performance metrics.

Additionally, the user experience is improved by the intuitive interface of the P460, where advanced call management features, such as call routing, conferencing, and voicemail integration, are easily accessible. This user-friendly design helps reduce the learning curve and encourages quick adoption among employees.

In summary, the Avaya P460 stands out as a comprehensive communication solution that integrates advanced technologies and features focused on enhancing collaboration and productivity within organizations. With its scalability, security, reliability, and analytical capabilities, it addresses the diverse communication needs of modern businesses, making it an intelligent choice for enhancing enterprise communication strategies.
Top Page Image Contents