Chapter 6
Table | |
|
|
Field | Description |
|
|
|
|
Method | The method used for monitoring the variable. Possible |
| options are: |
| • Rate @ Interval - The Alarm uses the counter’s rate |
| in the last interval. |
| • Total - The Alarm uses the absolute number of the |
| counter from the time the device was last reset. |
| * Note: The Alarms and Events tool can only |
| configure Alarms using the |
| Rate @ Interval method. To configure |
| Alarms based on the absolute number of |
| packets, use the CLI (Command Line |
| Interface) or a |
|
|
Startup Alarm | The type of Event that can be generated as the first Event |
| for the Alarm. Possible types are: |
| • Rising - The first Event that can be generated must |
| be a Rising Event. If the rate falls below the Falling |
| Threshold before it rises above the Rising Threshold, |
| a Falling Event is not generated. |
| • Falling - The first Event that can be generated must |
| be a Falling Event. If the rate rises above the Rising |
| Threshold before it falls below the Falling Threshold, |
| a Rising Event is not generated. |
| • Rising and Falling - The first Event generated can |
| be a Rising or a Falling Event. |
|
|
Rising Threshold | The upper threshold for the counter. |
|
|
Falling Threshold | The lower threshold for the counter. |
|
|
Owner | The owner of the Alarm. This is usually the person who |
| created the Alarm. |
|
|
29 | Avaya P120 SMON User Guide |