Avaya P333T quick start Power up, Avaya P330 AC Version, Avaya P330 DC Version

Page 4

Power up

Avaya P330 AC Version

1.Insert the power cord into the power connector (BUPS or Power Supply) on the rear of the unit.

BUPS connector

AC connector

2.Insert the other end of the power cord into the electricity supply or the BUPS connector.

!The unit powers up and performs a self test procedure. The LEDs flash at regular intervals after the self-test procedure is completed successfully.

3 Avaya P330 DC Version

WARNING: Before performing any of the following procedures, ensure that DC power is OFF.

CAUTION: This product is intended for installation in restricted access areas and is approved for use with 18 AWG copper conductors only. The installation must comply with all applicable codes.

DC terminal block

1.Connect the power cable to the switch at the input terminal block on the rear of the unit.

!The terminals are marked “+”, “-“ and the IEC 5019a Ground symbol.

!The size of the three screws in the terminal block is M3.5.

!The pitch between each screw is 9.5mm.

2.Attach the appropriate lugs at the wire end of the power supply cord.

3.Wire the DC power supply to the terminal block.

!The unit powers up and performs a self test procedure. The LEDs flash at regular intervals after the self-test procedure is completed successfully.

WARNING: The proper wiring sequence is:

ground to ground

positive to positive

negative to negative

Always connect the ground wire first and disconnect it last.

Image 4
Contents Avaya P333T Unpack EquipmentDocumentation Avaya P330 Documentation and Utilities CDRack mount optional Open hinged endAvaya P330 AC Version Power upAvaya P330 DC Version Connect the cables Connect PCs, servers, routers, workstations, and hubsConnect the console cable Avaya P333T LEDsBasic configuration Assigning the Stack IP AddressSetting the Parameters Default Switch ParametersDefault Port Parameters Configuration Parameter Default SettingSystem Requirements Run the Web-Based Manager optionalRunning the Embedded Manager Page Documentation and Online Help Page Contact Information From the United StatesFrom outside the United States AP Asia Pacific. Email sgcoe@avaya.com

P333T specifications

The Avaya P333T is a robust networking device known for its reliability and performance in various enterprise environments. Positioned as a solution tailored for small to medium-sized businesses, the P333T combines numerous features and technologies aimed at enhancing network efficiency and security.

One of the key characteristics of the Avaya P333T is its stackable design, which allows for flexibility and scalability. This feature enables businesses to start with a smaller configuration and expand their network infrastructure as requirements grow. With the ability to stack multiple units, organizations benefit from simplified management and streamlined operations.

In terms of performance, the P333T supports high-speed connectivity, providing multiple Ethernet ports that are capable of 10/100 Mbps throughput. This allows for seamless integration of various devices, whether it be computers, servers, or IP phones. The switch is equipped with Layer 2 switching capabilities, ensuring effective communication within the local area network.

One of the significant advantages of the Avaya P333T is its support for both VLANs (Virtual Local Area Networks) and QoS (Quality of Service). VLAN functionality aids in better managing network traffic by segregating different segments, enhancing security and performance. Meanwhile, QoS features prioritize critical applications, ensuring that voice and video traffic receive the necessary bandwidth to function without interruption.

The device also includes advanced network management capabilities. Administrators can utilize Avaya's network management tools for entire visibility and control over the network, enabling proactive monitoring and troubleshooting. The ability to configure the switch via a web-based interface or command-line interface adds further convenience to network management.

Security is another area where the Avaya P333T shines. It provides robust security features such as port security, which helps to prevent unauthorized access by controlling which devices can connect to the network. In addition, the switch supports strong authentication protocols, contributing to a more secure networking environment.

Overall, the Avaya P333T is designed to cater to the growing demands of businesses seeking reliable, secure, and high-performance networking solutions. Its combination of scalability, advanced management features, and robust security protocols makes it an excellent choice for organizations looking to enhance their network infrastructure while ensuring efficient operation.