Axis Communications manual Connect power to the PS-24

Page 6

PS-24 Mains Adaptor

Connect power to the PS-24

1.Remove the lid of the power supply by removing the 4 screws.

2.Make sure the power switch 4 is set to ‘0’ (off).

Important!

The power switch does not break on both poles at the AC input. The power switch shall only be used to turn the camera on/off. When the power switch is set to off, high voltage is still present in the AXIS PS-24 mains adaptor. Regard the switch in the building installation as disconnect device.

3.Make sure the voltage selector switch 5 is in the correct position. The setting must correspond to the input mains voltage i.e.:

set the switch to 115V if you intend to power the unit from a 100-120V mains voltage line.

set the switch to 230V if you intend to power the unit from a 220-240V mains voltage line.

4.Remove the outer ring of the cable gland, thread the mains cable (not supplied) through the outer ring and then through the cable gland.

5.Connect the live/ground wires to AC Input 6 (230VAC and or 115VAC and ). Replace and tighten the outer ring to secure the cable.

6.Refer to the installation section for your network camera for information on how to connect the power and alarm inputs/outputs.

7.Check that the cables are securely tightened and that the voltage selector switch is in the correct position.

Important!

Make sure the power switch 4 is set to ‘0’ (off) until all cables have been connected and the installation is complete.

Image 6
Contents PS-24 Mains Adaptor Installation Guide Page Mount the PS-24 box using the supplied holders Cb aAlternative installation PSU box PS-24 Mains Power Adaptor To camera From camera Outer ring Cable glandConnect power to the PS-24 Connect the Axis 231D/232D power and alarm inputs/outputs Connect the Axis 225FD power and alarm input/output PS-24-Versorgungsnetzteil Alternative Installation PSU-Gehäuse PS-24-Versorgungsnetzteil WichtigPS-24 an das Stromnetz anschließen PS-24-Versorgungsnetzteil Versorgungs- und Signalleitungen für Axis 225FD anschließen Steuer- tastePage PS-24 Power Supply Installation Guide Rev

PS-24 specifications

Axis Communications has long been a leader in network video solutions, and the PS-24 is a notable addition to its portfolio. This high-performance power supply is specifically designed for powering Axis network cameras and other PoE (Power over Ethernet) devices. The PS-24 is recognized for its reliability and efficiency, making it an ideal choice for various surveillance applications.

One of the key features of the Axis PS-24 is its ability to deliver up to 24 watts of power per port, which is essential for operating high-performance IP cameras. With a total of 24 ports, it can power multiple devices simultaneously, providing flexibility for large installations. The versatile power supply is compatible with a wide range of Axis products, ensuring seamless integration within existing systems.

The PS-24 employs advanced power management technologies, which enhance the reliability and efficiency of power distribution. It uses IEEE 802.3af and IEEE 802.3at standards to deliver power, allowing it to work with both standard and high-power PoE devices. This makes it suitable for a variety of applications, from surveillance to access control systems.

In terms of build quality, the PS-24 is engineered to withstand harsh conditions. It features a robust design with built-in surge protection, ensuring that both the power supply and connected devices are safeguarded against voltage spikes and fluctuations. The device is also equipped with LED indicators for monitoring port status, which simplifies troubleshooting and maintenance.

Another standout characteristic of the Axis PS-24 is its energy efficiency. It is designed to minimize power consumption, helping organizations reduce their energy costs and environmental footprint. Additionally, the device is compliant with various energy efficiency standards, contributing to sustainability goals.

Installation and configuration of the PS-24 are straightforward, thanks to its user-friendly design. It supports rack mounting, making it easy to integrate into server rooms or network closets, while its compact form factor allows for optimum space utilization.

Overall, the Axis Communications PS-24 power supply is a robust, efficient, and reliable solution for powering network devices in any security infrastructure. Its combination of high wattage per port, advanced power management, and durable design makes it a preferred choice for professionals in the field.