Optimus STAV-3780 owner manual Troubleshooting, Problem Cause Suggestion

Page 34

Troubleshooting

If the receiver is not working as it should, the following suggestions might help. If you follow the suggestions in this chart and the receiver still does not work properly, contact your local RadioShack store for assistance.

Problem

Cause

Suggestion

 

 

 

 

 

 

Power does not turn on.

Power cord is disconnected.

Plug in the power cord.

 

 

 

 

Protection circuit is activated.

Unplug the power cord, then plug it in again.

 

 

 

The receiver does not respond

Static discharge has affected the re-

Unplug the power cord, then plug it in again. (If

to button presses.

ceiver.

static electricity is a problem, use the remote control

 

 

as much as possible.)

 

 

 

No sound.

Incorrect connections.

Check and correct the connections.

 

 

 

 

The mute function is activated.

Press MUTING.

 

 

 

 

The volume is turned down.

Turn up the volume.

 

 

 

 

Speaker wires are disconnected.

Connect the speaker wires.

 

 

 

 

Speakers are turned off.

Press SPEAKER so SP A appears on the display.

 

 

 

 

TAPE 2 function is engaged.

Press TAPE 2 so TAPE 2 clears from the display.

 

 

 

No picture when you select a

The selected video source is not set

Correct the problem with the selected video source.

video source.

correctly.

 

 

 

 

 

Incorrect connections.

Check and correct the connections.

 

 

 

High noise level.

Station not correctly tuned.

Adjust tuning.

 

 

 

 

Antenna not connected.

Connect the antenna.

 

 

 

 

FM antenna still coiled or is not

Stretch both ends of the antenna taut and reposition

 

pointing in the correct direction.

the antenna.

 

 

 

 

AM loop antenna not pointing in the

Adjust the AM loop antenna.

 

correct direction.

 

 

 

 

 

Noise is coming from another electri-

Try using an AC line noise filter to reduce the noise.

 

cal appliance.

 

 

 

 

Automatic tuning does not stop

Stations are too weak.

Use a better antenna.

when searching for stations.

 

 

 

 

 

Cannot make copies of video

Tapes are protected by a copy pro-

You cannot make a good copy.

tapes.

tection method.

 

 

 

 

 

Video connections are incorrect.

Check and correct the connections.

 

 

 

Remote control does not work.

Remote is set to other device.

Press the CONTROL MODE button for the device to

 

 

control.

 

 

 

 

Code is not correctly set.

Try re-programming the remote control.

 

 

 

 

Batteries are weak.

Replace the batteries.

 

 

 

Remote does not control cas-

Cassette deck or CD player is not

The feature only works with Optimus Professional

sette deck or CD player.

compatible.

Series components.

 

 

 

 

Control cable is not plugged in.

Properly connect the control cable.

 

 

 

 

Audio cables are not plugged in.

Properly connect the audio cables.

 

 

 

34

Image 34
Contents Audio/Video Receiver Introducing the Optimus STAV-3780 Important Safety Instructions Contents Preparing Your Receiver Positioning SpeakersSetting the Impedance Selector Switch Connecting SpeakersPreparing the Speaker Wires Preparing Your ReceiverConnecting the Front Speakers Right Front Speakers Left Center SpeakerConnecting the Center Speaker Connecting Surround-Sound SpeakersConnecting a Subwoofer Amplifier Connecting a CD Player Connecting Program SourcesConnecting a Turntable Connecting Cassette DecksConnecting Video Sources Connecting TVs/Video MonitorsDVD 5.1-Channel Inputs AM Antennas Connecting the AntennasFM Antennas Antenna Using One Remote Control for More than One Unit Installing Remote Control’s BatteriesUsing the AC Power Outlet Connecting to AC PowerBasic Operation Direct Access Tuning Remote Control Only Tuning the RadioManual and Automatic Tuning Basic OperationAdjusting Balance Using MPX ModeMemory Tuning Loudness Control Using HeadphonesMuting the Receiver Bypassing the Sound ControlsMonitoring a Program Source Cassette Deck/VCR FeaturesUsing the VCR/TAPE 1 and Tape 2 Monitor Buttons Dubbing a Cassette TapePlaying a Video Tape Cassette Deck/VCR FeaturesPlaying and Recording Video Tapes Copying a Video TapeVirtual Dolby Surround Dolby Virtual/SRS Using Advanced Sound OptionsDolby Pro Logic Surround DSP EffectCenter Mode Setting Using Advanced Sound OptionsSound Mode Adjustments Remote Control Only TheaterCenter Level Delay TimeTest Tone Rear LevelsUsing the Remote Control Control Mode ButtonsUsing the Remote Control VCR Brand CodeCD Brand Code Catv Brand Code Receiver/Amplifier Operation Number ButtonsCD Player/MD Recorder Operation Cassette Deck OperationDVD Player Operation Rapidly advances backward/forward within a chapter/trackLD Player Operation VCR OperationTV and Catv Operation Satellite Receiver OperationTroubleshooting Problem Cause SuggestionCare and Maintenance FCC Wants You to Know Amplifier SpecificationsVideo Section AM Tuner SpecificationsFM Tuner GeneralIndex to Features by Control Name ControlRadioShack Division of Tandy Corporation Fort Worth, Texas

STAV-3780 specifications

The Optimus STAV-3780 is an advanced robotic system designed to enhance efficiency and performance across various industries. This state-of-the-art machine is characterized by its robust design, cutting-edge technology, and remarkable adaptability, making it a standout solution for modern automation needs.

One of the main features of the STAV-3780 is its powerful artificial intelligence capabilities. Equipped with advanced machine learning algorithms, the robot can analyze vast amounts of data in real-time, allowing it to make informed decisions and adapt to changing environments. This feature enhances its operational efficiency and minimizes human intervention, resulting in decreased labor costs and increased productivity.

The STAV-3780 also boasts superior mobility and dexterity. Its 6-axis robotic arm provides exceptional flexibility and precision, enabling it to perform complex tasks with ease. Whether it's packaging, assembly, or quality control, the STAV-3780 can navigate various workspaces effectively, maneuvering around obstacles while maintaining high accuracy.

Another remarkable characteristic of the Optimus STAV-3780 is its user-friendly interface. The system comes with a touch-screen control panel that simplifies programming and operation. Users can easily set parameters, monitor performance, and troubleshoot any issues that may arise, making it accessible for operators with varying skill levels.

In terms of connectivity, the STAV-3780 is equipped with IoT capabilities, allowing it to communicate seamlessly with other machines and data systems. This connectivity enables remote monitoring and real-time performance analytics, providing valuable insights into operation efficiency and facilitating predictive maintenance.

Safety is also a key priority for the STAV-3780. It is designed with numerous safety features, including sensors and emergency stop functions, ensuring that it operates safely around human workers and other equipment. This focus on safety meets industry regulations while protecting valuable personnel and assets.

The Optimus STAV-3780 is not only versatile but also energy-efficient. Its smart energy management system optimizes power consumption, reducing operational costs and promoting sustainability. Overall, the STAV-3780 stands out in the realm of robotics, delivering a perfect blend of innovation, reliability, and efficiency, making it an invaluable asset for businesses looking to thrive in an increasingly automated world.