Buffalo Technology WLE-POE-S specifications Power Over Ethernet Supply

Power Over Ethernet Supply

Connecting to your Power-Over-Ethernet Supply Adapter (WLE-POE-S)

The WLE-POE-S Power Supply Adapter is an adapter for supplying power the AirStation. Using this product enables compatible AirStations or AirStations with a compatible POE Receiver Adapter to be used in locations that are not provided with a nearby power source.

■NOTE: The WLE-POE-S Supply Adapter must be used with a compatible AirStation or POE Receiver when supplying power to the AirStation. Check the specifications on Page 4 to verify compatibility.

Package Contents:

Screw holes

Power indicator

Lit green when the product is connected to the AC outlet.

◗	POE Supply Adapter	1
◗	Power Supply Cable	1
◗	Setup Guide	1		AC Adapter
◗	Warranty Certificate	1
			Air vents
			POE ports	LAN port
				Connect to hub, etc.
			Connect to the POE-compatible AirStation
Precautions:
			or WLE-POE-R Adapter.

◗Connect the AC adapter last.

◗Always connect the POE-compatible AirStation to the POE port.

◗The Receiver and Supply cannot be attached by CAT5 longer then 100M.

◗Use POE CAT5 cables (all eight wires)

◗Use commercially available CAT5 cables. Using cables prepared by the user may result in the network configuration not functioning properly.

◗The products will become warm during use; this does not indicate malfunction.

PY00-29024-DM20