LinkStation Diagram
1.Power Button – The Power Button is used to power the LinkStation on or off. The power on process will take approximately 30 seconds to a full minute to complete. During this time, do not unplug the LinkStation from the wall outlet. To turn the LinkStation off, press and hold the power button for several seconds until the Power LED light begins blinking. At that time, stop pressing the button and shutdown should complete within 30 seconds.
2.Power LED – The Power LED light will blink during startup or shutdown, but otherwise will remain lit up while LinkStation is powered on.
3.LINK/ACT LED – The LINK/ACT LED light will light up if an Ethernet Cable is plugged in and attached to another network device, such as a router, hub, or PC. Periodically, the LED will blink, signifying network activity.