Mbps Wireless Notebook Adapter-g | Buffalo Technology WLI-CB-G54A

54 Mbps Wireless Notebook Adapter-g

Windows XP

Installation & Configuration

1.Installing the Wireless Notebook Adapter-g Drivers:

a. Insert the AirNavigator CD into the CD-ROM drive of the notebook. The Air Navigator Setup Wizard launches automatically. If the Air Navigator Setup Wizard does not launch automatically, launch the wizard manually by selecting Start>>Run to open the Run dialog box. Enter D:\Setup.exe in the Open field. D: represents the letter assigned to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should refelect that difference. Click the OK button to launch the wizard.

b. Select Install Wireles Adapter. Click the OK button to begin the installation process.

c. Review the Software License Agreement. Click the Yes button to confirm your agreement with the terms and continue installing the Wireless Notebook Adapter drivers. Click the No button to abort the installation process.

2.Installing the Wireless Notebook Adapter-g:

a. Insert the Wireless Notebook Adapter, with the Buffalo logo facing up, into an available CardBus slot. CardBus slots are usually located on the left or right side of the notebook. Once the Wireless Notebook Adapter is installed correctly, the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, remove the Wireless Notebook Adapter and restart the notebook. Re-insert the Wireless Notebook Adapter once the notebook has rebooted.

b. Select Install the software automatically. Click the Next button.

c. Select the driver you want to install. If multiple drivers are listed, select the most recent driver version. Click the Next button.

d. If a window opens, stating that your driver does not pass Windows Logo testing, click the Continue Anyway button. When the Wireless Notebook Adapter is successfully installed, click the Finish button. Restart your notebook if prompted.

1 2